----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 11:58 PM 12/12/2005, [EMAIL PROTECTED] wrote:
I ordered a new set of rocker arm shafts from a very well known
supplier that runs a full page d in TAP. When the rocker shafts
arrived, they were in a plastic bag, with no paperwork, no
packaging, and no part numbers.
Yes, I know who you mean. they have a ton of stuff they find on the
surplus market. Generally it is good stuff cheap, but every once in
a while it's not. You may have heard about the mag drive gear
debacle a few years back...
You may also recall a crankshaft AD a few years back. A well known
CRS in New England ended up having every crank they touched for the
past 3 or so years condemned. I had first hand knowledge 'cause I
helped do the research. With my crank... They simply skipped the
inspection phase and never caught the problem until a prop fell off
in flight. In front of the FAA office in Burlington, MA...
John Cooper
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
