RE: [COUPERS-TECH] FW: snubber cable(Univair's reply)

[Roy Stubbs]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

 

 

This message was automatically forwarded on behalf of Bill Bayne.  Please address any responses to the mail list or directly to Bill at: [EMAIL PROTECTED]  

 

 

From: William R. Bayne <[EMAIL PROTECTED]>
Date: January 31, 2006 22:41:11 CST
To: Ed Burkhead <[EMAIL PROTECTED]>
Subject: Re: [COUPERS-TECH] FW: snubber cable(Univair's reply)


*******

Correct me if I'm wrong, but "these cables" are not "listed on the type certificate" for any "models of
Ercoupes" on TC 718 or TC787, including the M10 (on which it was a production part).

Perhaps Mr. Clemmer could share the basis for his distinction, which would seem to infer that somewhere
"these cables" were used or are somewhere authorized by AD or service bulletin for "later models"?

I see confusion - not clarity here. Maybe he just drew the short straw when your query came in?

Regards,

WRB

--

On Jan 31, 2006, at 22:28, WILLIAM BIGGS wrote:

 

From:  "Univair Aircraft Corp." <[EMAIL PROTECTED]>
To:  "Bill Biggs" <[EMAIL PROTECTED]>
Subject:  snubber cable
Date:  Tue, 31 Jan 2006 13:37:33 -0700
>Hi Bill,
>
>These cables are used on later models of Ercoupes but they do not belong on
>a 415c. There was no AD or service bulletin ever issued for its use on a
>415c and it is not listed on the type certificate.
>
>Hope this helps,
>Tim Clemmer
>
>

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/