----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
If you buy your parts from Univair, you will end up paying 140k in Dollars.
I added ones just the big and expensive parts from them and made it easily
to 120 k Dollars. One uncovered wing plus aileron is already $15000 !
Hartmut
----- Original Message -----
From: "Jason J Ellingson" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, February 10, 2006 12:49 AM
Subject: RE: [COUPERS-TECH] Cost and benefits of SB 32
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
I wonder what it would cost to build an Ercoupe from scratch?
1) Via approved/certified parts (hence certified aircraft) (I'm guessing
over a $40,000 if you could get all the parts)
Or
2) Via building it by reverse engineering and it being a homebuilt
experimental (perhaps by using hard-to-fabricate parts from Univair or
salvaged plane and making the 51% rest yourself) -- that in turn asks if
it
would be a copyright/patent infringement of Univair's TC?
Silly questions, I know...
- Jason
-----Original Message-----
From: John Cooper [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 09, 2006 5:30 PM
To: [email protected]
Subject: Re: [COUPERS-TECH] Cost and benefits of SB 32
Is there a possible outcome from this inspection that could be deemed
not repairable at any cost??
No. Entire aircraft have been "repaired" from just a data plate. Don't
loose yours!
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
