----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
John,
Try Vern Gregory . He has 30 Ercoupes that he is parting out. He's very
helpfull. Call him at 803 796 2605. I know of another guy that just finished
parting one out and has a few pieces left including pushrods. I don't know
if it's OK to publish his number here. Contact me if you want to contact
him.
Whatis your ser. number ? Judging by your N nunber it might be around 370.
Hope this helps,
Randy Hougham
Grandpa's Ercoupe
NC87384
----- Original Message -----
From: "John Craparo" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, March 11, 2006 9:10 PM
Subject: [COUPERS-TECH] Aileron Pushrods - Source?
----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Hoping the group may be able to help. We are making great progress on
87197 and hope to have her in the air in the next two weeks. Here is
the current challenge. The Aileron Pushrods that are on my Ercoupe
are rusted internally. I can tap them on the ground and rust pours
out. Univair does not have any in stock and it will likely take a
month for them to be available.
Does anyone know of an alternate source for these parts. 415C S/N
370. Need left and right part 415-52034.
Thanks,
John
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
