----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 12:29 PM 3/23/2006, you wrote:
Wanted to see what group recommends so I can install new seal so it
won't leak or fail but will be able to remove it when time come in future.
Use Continental PN 646942 Gasket maker or Loctite 515 Gasket eliminator.
Clean all the oil and old sealant from the area. Be sure to put
sealant on the joint of the seal. Make sure the joint is not aligned
with the joint in the crankcase. Try for about 30 degrees left or
right of the top case split. Align the joint of the spring 180
degrees from the seal joint.
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
