----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Jack asked:
> I'm having Kenney Wheel Fairings installed on my
> 1947 - 415C Ercoupe. The A&P is concerned about
> the way the instructions say to jack the plane up.
> Do you know the proper way to jack up my plane?
Jack,
I’m not a mechanical type.
The only two ways I know are these:
- Put
a thick-walled pipe through the center of the knee of the landing gear and
jack on that.
- Have
someone crouch under the wing, under the main spar and then stand up,
lifting the wing. The other person then slides a saw horse topped
with sandbags (or something) under the spar.
I’ve used both these methods.
Hope that helps.
If not, ask this question on the tech
list. I’m sure others who’ve never done it themselves need to
know the answer.
http://edburkhead.com
ed -at-
edburkhead???.com (change
-at- to @ and remove "???")
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
