----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Don, You wrote, "John, My C-90 was recently overhauled - 110 TTSMOH. I'm
getting 163 deg F, with oil press at 45 psi, oprating at 2400 rpm, 2000' msl,
OAT 73 deg F. I'm sure not exceeding the OAT plus 110 deg figure (some say
plus 100 ?). My concern is that my oil temp may be running too cool,
especially if it lowers when the ambient temps drop after the warm
Summer months."
How do you figure that this kind of temperature is too cold? It is still
hot enough to evaporate any moisture yet not too hot to coke carbon onto the
brgs and rings and not have to worry about many other elements associated
with extreme heat. I would think you are right where you would want it.
Godon Smith
Many people want a relationship with God, but only
in an advisory position!!!!!!!!
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
