----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 09:41 AM 6/7/2006, Ralph Finch wrote:
NTSB determined that language in
the Lycoming engine overhaul manual incorporated by reference not just
existing service bulletins, but future ones, too.
OK, now you've opened a whole 'nother can of worms. In fact, this is
not new information to those of us who deal with this stuff daily
(although apparently it is to the mechanic who did the
overhaul). However, it is not applicable to the Ercoupe world as
none of the service manuals contain such language.
Simply put, when you overhaul an engine you must do it in accordance
with the manufacturer's overhaul instructions. If the instructions
contain references to future bulletins, then they become part of the
overhaul instructions. Simple enough, right?
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
