----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 02:48 PM 7/14/2006, you wrote:
My mechanic is wondering if there is a clamp with a pin available
for connecting the muffler and exhaust pipe. He said this is a
typical arrangement to keep the two mating pieces from sliding in
and out, which on my coupe is about 1/8 - 1/4".
They used to be made that way, but no more. you can drill the parts,
stick a monel rivet in the hole, and clamp over it.
Currently there is just a simple worm gear type clamp in place.
Is this an Ercoupe part?
No. The clamp should be a band clamp with a bolt squeezing it.
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
