----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----I think it is your right aileron trim tab you bend down, Dennis. Even if you don't have an ailerron trim tab, it is your right side that must be adjusted (downward ) to get your left side to say down. At least, that works for me, but I do have trim tabs on each aileron.
DON BOWEN
[EMAIL PROTECTED]
> Date: Sat, 15 Jul 2006 13:44:55 -0700
> From: [EMAIL PROTECTED]
> To: [email protected]
> Subject: [COUPERS-TECH] Bending Aileron
>
> ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
>
>
> Flying my Ercoupe (1946 415-C) at cruise speed I must hold slight left aileron to continue flying straight. If I let go of the control, it gradually turns to the right. The faster I cruise, the faster it turns to the right when I stop holding left aileron.
>
> To correct the problem, the manual indicates I should bend the entire trailing edge of the left aileron down 1/8 inch. I would appreciate any advice on how to correct this problem without bending the aileron. Thanks, Dennis Hatfield
> ==============================================================================
> To leave this forum go to: http://ercoupers.com/lists.htm
>
>
>
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
