----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
To all, It is sad to see the FAA or any Gov. agency
deliberately destroy a persons private property. It shows a total disregard for
individual rights. Too see that in America is alarming!! That would be like the
state patrol hauling your car to the junk pile for a minor accident or maybe
even a flat tire on the highway. Dick L.
----- Original Message -----From: Hartmut BeilSent: Tuesday, July 25, 2006 2:18 AMSubject: Re: [COUPERS-TECH] Crashed Coupes and Government handling----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----"Sad to see the FAA destroy a potential restorable airplane."I missed the beginning of this thread. Can someone please enlighten me?Is the FAA now out and destroys Ercoupes that are having sloshing compunds in their tanks?Hartmut----- Original Message -----From: billjhsSent: Monday, July 24, 2006 11:11 PMSubject: Re: [COUPERS-TECH] Crashed Coupes and Government handling----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Lee and Harry,
I can attest to the sloshing compond making a mess. I jusr recently purchased a coupe which someone ferried
back to NJ for me from Idaho. I took it right in for an annual and to check it out, guess what, the whole fuel
system was being clogged with sloshing compound. It wasn't in the header tank but it sure made a mess of
the crossover lines and fittings. It wouldn't allow the return to work properly. It was making the mechanic go
crazy because the tank kept overflowing. He also found an improper restrictor fitting on the fuel pump. Had the
tanks rebuilt by the Wrights and now all is ok. Don't mess around with loose sloshing compound for sure.
Bill
N2367H
[EMAIL PROTECTED] wrote:
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----Lee,Thanks for the update.I see two possibilities you did not mention.During an annual, an AD is required to remove the fuel pump cover, and inspect it for foreign material, water, and corrosion.I am aware of several instance where the fuel pump failed after this inspection , simply because the mechanic did not torque the cover bolt as required in the AD....allowing the pump to suck in air around the cover, instead of fuel from the wing tanks. Often this results in a new, costly fuel pump, instead of simply applying proper torque to the 1/4 inch bolt.Another possibility is Carburetter icing:Older Continental engines are more prone to icing that Lycoming engines. And, most of our present pilots have been trained on Lycomings....never experienced any carb ice.This is due to the design of the intake pipes on Lycomings being routed thru the oil tank, giving a warmer air to the carburetter, thus less chance of ice buildup.Yes, Lycomings can ice up, too.....and all proper procedures should be taught and applied to every flight....apply carb heat BEFORE closing the throttle.Recently, the weather throughout the US has been very humid, and warm....setting up the ideal ice production situations.I suspect several engine failures are simply due to this potential ice problem.Yes, sloshing compounds can be a real problem, and should be investigated. Proper use of these compounds are safe. However some of the older compounds seem to be subject to delamination when using auto fuels...., and other failures may be due to improper cleaning of the tanks prior to sloshing, etc. Information suggests that alcohol additives to gasoline are a real problem...Of course, one is not supposed to be using auto fuel that contains alcohol !Sad to see the FAA destroy a potential restorable airplane.Harry FrancisN93530Elliston, VA============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
