----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
As my old DI would have said: My other right! I believe it is on the left side. > -----Original Message----- > From: Roy Stubbs [mailto:[EMAIL PROTECTED] > Sent: Sunday, August 13, 2006 9:03 PM > To: John Silberman; Ercoupe Technical Discussion > Subject: RE: [COUPERS-TECH] Serial numbers > > ----[Please read http://ercoupers.com/disclaimer.htm before following any > advice in this forum.]---- > > > I believe such is required by the FAR's. My serial number is etched on > the right side fuselage under the leading edge of the horizontal > stabilizer. > > Roy > > > -----Original Message----- > > From: John Silberman [mailto:[EMAIL PROTECTED] > > Sent: Sunday, August 13, 2006 8:38 PM > > To: Ercoupe Technical Discussion > > Subject: [COUPERS-TECH] Serial numbers > > > > ----[Please read http://ercoupers.com/disclaimer.htm before following > any > > advice in this forum.]---- > > > > > > I heard, and want to verify, that other than the data plate, the > > factory serial number is also stamped somewhere into the fuselage. Is > > this true and where should I look? > > > > Thanks, > > > > jsilberman > > > > > ======================================================================== > == > > ==== > > To leave this forum go to: http://ercoupers.com/lists.htm > > > > > > ======================================================================== == > ==== > To leave this forum go to: http://ercoupers.com/lists.htm > > ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
