----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I have a problem with the Cleveland brakes on my 1946 415C. I have removed the floor board several times but have never checked what kind of master cylinder I have. The left side brake twice in the last two days has locked up or at least got so tight that I could not taxi even at high RPM. In both cases, the brake got tight after landing and using the brake extensively trying to make the first turn off. Also, in both cases I solved the immediate problem by bleeding a few drops of fluid out of the left brake; then the brake seemed to release and operate normally. Can anyone advise me if this is a master cylinder problem or should I investigate something else. I added brake fluid several months ago, could over filling it cause this problem? Thanks. Dennis Hatfield N2738H. Dennis ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
