----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
Lynn:
Can you point me to any documentation on that Alon shoulder harness
installation? I want to put harnesses in the Cadet, and I think the
relevant structure is identical.
-- Karl
At 11:10 AM 1/30/2007, [EMAIL PROTECTED] wrote:
Hey John: There are at least three different shoulder harness attach
methods. I do not know if they all have FAA signatures or not. The
one I used a couple of times is the one that an Alon owner in
California had engineered and approved. It does not require removing
any rivets from the bulkheads behind the baggage compartment. It
adds stiffener plates on the two bulkheads behind the baggage area
and uses a 1/4 in steel rod to connect to them and to the shoulder
harness hook up points.
Karl Sutterfield
N9532V, Mooney M10 Cadet s.n. 700022
kasutt @ blindhog . com (remove spaces to reply)
Box 294150
Kerrville, TX 78029
830-257-5458 home office
830-257-5468 fax
830-285-7323 cell
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
