Hi Paul, Thank you very much for providing the copy of the approved 337 form, and for the offer to try to obtain the approval through your FSDO. They must know you & your work, and I'm sure that it works to your advantage..
I have to believe that this previously approved 337 should help get Ricks split elevator conversion approved by the local FAA. Thanks again & best regards, Dan Hall N3968H ----- Original Message ----- From: "Paul M. Anton" <[EMAIL PROTECTED]> To: <[email protected]>; "Dan Hall" <[EMAIL PROTECTED]> Cc: "Rick Eason" <[EMAIL PROTECTED]> Sent: Saturday, March 29, 2008 9:04 AM Subject: Re: [ercoupe-tech] Split tail modification - previous FAA approval (337 form or?) > ----- > > > > Rick Eason out here in Merced CA wants to install a split tail on his 415C > however he's having trouble obtaining approval from the local FAA. > > Does anyone out there have any type of documentation (STC or 337) that > would > support the approval of a split tail installation on an Ercoupe??? > > > Thanks & regards, > Dan Hall > > > Hi Dan: > > I've gotten a couple of these approved. However I'm stuck down here in San > Diego trying to get a rental house ready for market. I don't have my files > with me. Has your chap already tried to get an approval using previously > approved 337s as acceptable data? > > I do have a copy of one of the installations with me which I attached. > > If his FSDO doesn't want to approve it I'll try running it by mine---can't > hurt > > Cheers: > > Paul > N1431A > KPLU > > > ------------------------------------ > > Yahoo! Groups Links > > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.1/1348 - Release Date: 3/28/2008 10:58 AM ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ercoupe-tech/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ercoupe-tech/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
