Good test Ed.  Could you give a hint as to how much of an increase you
might expect to see in that size sample of gasoline and about how much
water the test should start with?  Thanks

 

Tommy

 

________________________________

From: [email protected] [mailto:[EMAIL PROTECTED]
On Behalf Of Ed Burkhead
Sent: Tuesday, June 03, 2008 9:38 AM
To: 'David Winters'; ety
Subject: RE: [ercoupe-tech] Alcohol Tester

 

 

Dave asked:

> OK Ed, now I am confused.

> What do you mean by "if the water level goes up"?

> Do you mean the total liquid in the jar?

> Or, is there a clear dividing line between the gas and water 

> that is actually higher than the original water?

> Or what?

 

When you have water and gasoline in a jar, there will be a clear
dividing line between the two fluids.  This is made much more prominent
when there's dye in the gasoline.

 

If you put water in the tall, thin jar and mark the level, then add
gasoline, put on the lid and shake it, then let it settle out, the water
will separate from the gasoline.

 

Alcohol will stay in solution (suspension?) in the gasoline as long as
water is not present.  But the alcohol prefers to be in solution with
the water.  So, this process lets the alcohol depart the gasoline and
join the water.

 

If there was alcohol in the gasoline when you start, then after the
shaking and settling it will look like the amount of water increased
(and the gasoline decreased).  So, you know the gasoline was
"contaminated" with alcohol.

 

Note that some gas pumps have one hose they share with three grades of
gasoline and some of their gasoline grades DO have alcohol.  If that's
so, then don't use the first bit out of the hose for this test.  Put the
first gallon or two in the car, then do the test.  If it passes, then
you can fill your gas cans for airplane use.

 

Ed

 

 

________________________________

From: David Winters [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, June 03, 2008 9:04 AM
To: 'Ed Burkhead'
Subject: RE: [ercoupe-tech] Alcohol Tester

 

OK Ed, now I am confused.

 

What do you mean by "if the water level goes up"?

 

Do you mean the total liquid in the jar?

 

Or, is there a clear dividing line between the gas and water that is
actually higher than the original water?

 

Or what?

 

(Sorry if I seem dense.)

 

ddw

        -----Original Message-----
        From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Ed Burkhead
        Sent: Monday, June 02, 2008 8:09 PM
        To: [email protected]
        Subject: RE: [ercoupe-tech] Alcohol Tester

        
        Daansen wrote:
        > Much has been posted about testing for Ethanol. You can 
        > purchase one thru the EAA of send for it at the following
        > address. Picture follows, I think.
        
        You can also get the testing kit at the local grocery store (and
get to eat
        the olives).
        http://edburkhead.com/Ercoupe/alcohol_test.htm
<http://edburkhead.com/Ercoupe/alcohol_test.htm>  
        
        Ed

 

Reply via email to