>From the Unison website: Eisman Mag Conversion Eisman made a special version of their mag with their own drive gear. The rotor shaft hole in the gear was about 7/8" and used a special bushing nut to hold on the gear. Operators must use the continental part number 36066 gear. These gears are found on about 15% of the Eisman mags, and particularly on Ercoupe aircraft Bill
To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Tue, 17 Jun 2008 13:45:12 +0000Subject: [ercoupe-tech] Magneto drive gears for c-75-12 I am converting from Eisemann to Slick magnetos and there is someconfusion about the proper magneto drive gear. Apparently, thepresent one on my airplane does not fit the Slick. I believe thecorrect gear is the 36067 for my engine. My AI believes it should be36066 but my understanding is that gear fits A 65 A75 and C75-8engines and the 36067 is for the C75-12 and C85-12. Does anyone have a definitive answer? There is a $370 difference incost between the two gear types. ThanksDavid _________________________________________________________________ Earn cashback on your purchases with Live Search - the search that pays you back! http://search.live.com/cashback/?&pkw=form=MIJAAF/publ=HMTGL/crea=earncashback
