Hey gang! I was curious about the trim rigging so I looked up the memo
on the installation and found on p2 para 11 this " control handle is
placed full forward, elevator nutral and the tab is bumped to a
straight edge and the nut secured. (no degrees given up/down). This
became effective with serial No. 1623 and up.
In flight with trim handle full forward, Ercoupe should be trinned
for high speed flight at 130 miles per hour; whith handle full back
should glide power off at 58 mph and climb at 55 mph with full
throttle. All speeds are true indicated, with 1260# normal load."
some of the above was from the Ercoupe service manual published by
Univair. Good flying Oliver
