My trim keeps creeping. Any suggestions ? Jim
N3439H Ser # 4064 415C -- In [email protected], "OLiver" <[EMAIL PROTECTED]> wrote: > > Hey gang! I was curious about the trim rigging so I looked up the memo > on the installation and found on p2 para 11 this " control handle is > placed full forward, elevator nutral and the tab is bumped to a > straight edge and the nut secured. (no degrees given up/down). This > became effective with serial No. 1623 and up. > In flight with trim handle full forward, Ercoupe should be trinned > for high speed flight at 130 miles per hour; whith handle full back > should glide power off at 58 mph and climb at 55 mph with full > throttle. All speeds are true indicated, with 1260# normal load." > some of the above was from the Ercoupe service manual published by > Univair. Good flying Oliver >
