NTSB Identification: ERA09FA087
14 CFR Part 91: General Aviation
Accident occurred Saturday, December 13, 2008 in Sebring, FL
Aircraft: ERCOUPE 415-D, registration: N99154
Injuries: 2 Fatal.

This is preliminary information, subject to change, and may contain 
errors. Any errors in this report will be corrected when the final 
report has been completed.

On December 13, 2008 at 1206 eastern standard time, an Ercoupe 415-
D, N99154, was destroyed during an in-flight breakup near Sebring, 
Florida. The certificated commercial pilot and the passenger were 
fatally injured. Visual meteorological conditions prevailed, and no 
flight plan was filed for the local flight, which departed Avon Park 
Executive Airport (AVO), Avon Park, Florida about 1115. The personal 
flight was conducted under the provisions of 14 Code of Federal 
Regulations Part 91.

According to a friend of the accident pilot, who was also a 
certificated aircraft mechanic, he and the pilot flew together in 
the accident airplane immediately prior to the accident flight. The 
friend did not note any abnormalities with the performance of either 
the airplane or the pilot during their flight, and upon returning to 
AVO, the friend disembarked the airplane and the accident passenger 
boarded.

Numerous witnesses observed the airplane flying in the local area 
around the time of the accident. One witness was outside talking 
with a neighbor when he observed the airplane flying overhead. The 
airplane was initially flying southwest, and made a "very slight dip 
and turned to the right. Then the airplane pulled up severely and 
started turning to the left." As the airplane continued upward and 
banked to the left, something "shiny" exited from the tail area of 
the airplane. The witness remarked to his neighbor, "What the heck 
is he dumping," and the airplane then began to break apart. The 
witness added that he did not hear any type of explosion and did not 
observe any smoke or fire. 

Another witness, who was also a certificated airline transport 
pilot, stated that while outside working on his house he observed 
the accident airplane flying overhead. He estimated that the 
airplane was flying at an altitude about 1,200 feet above ground 
level, and did not note anything abnormal about its flight path. 
About 45 minutes after first seeing the airplane, he heard an 
abnormal engine sound that diverted his attention again back to it.

The witness stated that the engine sound was smooth, continuous, and 
sounded as if the engine was being "over-sped," as if the engine 
were at full power and the airplane was in a high speed dive. When 
he looked up, he saw the airplane pitching up and rolling into a 
steep left bank, and initially thought that the pilot was attempting 
to perform a "barrel-roll or a slow roll." From his position, he 
could see the bottom of the airplane, as well as both wings, as the 
airplane traveled north. He additionally noted that while the 
airplane was banking, both ailerons were "fluttering" at a high 
frequency. The bank angle increased to almost 90 degrees, when the 
left wing of the airplane "folded back" and separated from the 
fuselage. The airplane then pivoted about the lateral axis 90 
degrees, and the right wing then separated from the fuselage along 
with a portion of the cabin. The wings "fluttered" or "twirled" to 
the ground, while the portion of the cabin continued forward and 
down to the ground. He recalled hearing three distinct "thuds" as 
the pieces of the airplane impacted the ground.

The witness also reported that during the breakup, the airplane 
released what initially looked like "confetti," which he later 
determined to be painted chips of dope from the airplane's fabric 
covered wings.

The weather conditions reported at Bartow Municipal Airport (BOW), 
Bartow, Florida, located about 24 nautical miles west of the 
accident site, at 1152, included winds from 020 degrees at 9 knots, 
gusting to 15 knots, 20 statute miles visibility, clear skies, a 
temperature of 16 degrees Celsius (C), a dewpoint of 6 degrees C, 
and an altimeter setting of 30.21 inches of mercury.

The pilot held a commercial pilot certificate with ratings for 
airplane single engine land and sea, airplane multiengine land, and 
instrument airplane. He also held a flight instructor certificate 
with ratings for airplane single engine, airplane multiengine, and 
instrument airplane. His most recent FAA second class medical 
certificate was issued on June 2, 2008. 

Examination of the pilot's most recent logbook, which began on May 
3, 2001, revealed that he had logged 7,126 total hours of flight 
experience, 12 hours of which were in the accident airplane make and 
model.

According to records provided by the FAA, the accident airplane was 
manufactured in 1946. According to maintenance records, the 
airplane's most recent annual inspection was completed on May 9, 
2008. At the time of the inspection, the airplane had accumulated 
2,588 total hours of operation.

The in-flight breakup occurred over a residential community built 
around a golf course. Portions of wreckage were found along a 
wreckage path that was 3,100 feet long, and oriented on a magnetic 
heading about 020 degrees. The first pieces of wreckage, found at 
the most southern end of the wreckage path, included both aft cabin 
windows. Paint chips, inspection panels, and various personal 
effects from inside the airplane were located further along the 
wreckage path, with the right wing being the next most substantial 
component located.

The right wing was located about 2,000 feet from the aft cabin 
windows, along the wreckage path. The wing was lodged in the ground, 
oriented perpendicular to the terrain. The wing remained largely 
intact, and was separated from the fuselage at the wing root, just 
inboard of the leading edge fuel tank. The wing spar remained intact 
to a point about 1-foot inboard of the wing root, where it separated 
from the remainder of the airplane's structure. Ten of the right 
wing's 17 inspection port covers were dislodged, and located at 
various points along the wreckage path in an inverted or "popped" 
position. All of the displaced covers had, with one exception, come 
from the wing root, leading edge, and outboard edge, while the 
inspection covers from the center and trailing edge portions 
remained in place.

The left wing was located about 900 feet beyond the left wing, along 
the wreckage path. The left wing spar was fractured at a similar 
location as the right wing spar. Several of the inspection port 
covers were dislodged, but did not display any discernable pattern 
as was observed on the right wing. The inboard portions of both wing 
spars were forwarded to the National Transportation Safety Board 
Materials Laboratory for further examination.

The main portion of wreckage came to rest about 200 feet beyond the 
left wing, along the wreckage path. The nose, cabin, and aft portion 
of fuselage exhibited extensive crush damage, and its entirety was 
contained with an area about 10 by 10 feet. The cabin was severely 
compromised, and the seat pan, where both occupants were located, 
was found about 125 feet north of the main wreckage. The empennage, 
horizontal and vertical stabilizers remained largely intact, but 
separated from the remainder of the fuselage, and was co-located 
with the main wreckage. The propeller was lodged in a shallow impact 
crater, and remained attached to the engine at the propeller flange. 
Chordwise scratching and burnishing was present on both blades. 

Aileron and rudder control continuity was traced from the flight 
control surfaces to the control "mixing" bellcrank, normally located 
just aft of the main spar carrythrough. Separations of the aileron 
control push-pull tubes were noted at both wing roots, and the 
elevator push-pull tube was separated about 1-foot forward its 
bellcrank.

Reply via email to