You can buy them used from Vern Gregory. I just got one a couple of months ago. Dave Winters
To: [email protected]; [email protected] From: [email protected] Date: Tue, 3 Nov 2009 16:10:48 +0100 Subject: RE: [ercoupe-tech] Re: Nose gear fairing Oh and I might add that the fairing is still available from Univair. http://univairparts.com/shopping/product_info.php?products_id=3430 This fairing is made for the steel scissors and should be mounted only on nose gears without snubber cable. Here is how it looks like when mounted: http://www.ercoupe.info/uploads/Main/drawings/a-486.jpg Hartmut To: [email protected]; [email protected] From: [email protected] Date: Tue, 3 Nov 2009 16:04:08 +0100 Subject: RE: [ercoupe-tech] Re: Nose gear fairing mike, to be more precise here it is http://www.ercoupe.info/uploads/Main/drawings/a-485.jpg But the pictured fairing is the one for the early style scissors. However, the later style fairing is similar in dimensions, just with a different style of attachment to the scissors. Hartmut To: [email protected] From: [email protected] Date: Tue, 3 Nov 2009 11:55:43 +0000 Subject: [ercoupe-tech] Re: Nose gear fairing I think the drawing can be found here. http://www.ercoupe.info/?n=Main.Drawings Mike @ C35 --- In [email protected], "avia...@..." <avia...@...> wrote: > > So it looks like installing the fairing and removing the cable stop is > probably a good idea if you can handle the change in landing characteristics. > > Is there anyone who has a template to fabricate the fairing, since they are > no longer available? > Windows Live Hotmail: Your friends can get your Facebook updates, right from Hotmail®. Windows Live Hotmail: Your friends can get your Facebook updates, right from Hotmail®. _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/177141665/direct/01/
