Linda. The rigging instructions are in the Service manual.
But the way the Ercoupe is constructed, there is no need to re-rig the plane when merely reattaching the ailerons, rudders and elevator. All these surfaces are bolted onto push rods that don't change the rigging setup when you disassemble the control surfaces. Hartmut To: [email protected] From: [email protected] Date: Tue, 24 Nov 2009 23:22:31 -0800 Subject: [ercoupe-tech] where are specs for rigging control surfaces? The paint shop's fee includes the services of an IA to remove the control surfaces (so they can be painted separately) and reassembly after painting, including log book sign-off for return to service. I asked the owner if I could supply specs for the Ercoupe, since I understand there are some unusual things about our rigging (e.g. IIRC, there were some Tech posts about special tension considerations). My experience with other trades suggests that spoon- feeding exactly what is expected will enhance my chances of it being done correctly. The owner readily agreed to my request. So, which booklets, documents (or portions of documents) should I show to that IA to ensure that good Ercoupe practice is followed in reassembly of the control surfaces? (Assume he's not already familiar with Ercoupes.) Thanks! Linda N3437H (Sky Sprite) L.A. _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009
