Darick.
It seems to me you are not having the original pretzel style yoke. Who ever fitted the yokes you are having now did probably not the best job. I found most yokes just screwed on to the shat. I would remove the screws, inspect the shaft and then go from there. The shaft will probably show elongated holes - in the worst case I think a replacement of the shaft is your only safe option. Hartmut To: [email protected] From: [email protected] Date: Sat, 16 Jan 2010 04:20:45 +0000 Subject: [ercoupe-tech] yoke play Folks, There is a lot of play in the yoke connection on my 415C. The yoke is a typical "U" shape style and is connected with two bolts. Can this be repaired or must the yoke and tube be replaced? The universal joint at the other end where it connects to the "T" is good. Thanks for any suggestions. Darick _________________________________________________________________ Keep your friends updated—even when you’re not signed in. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_5:092010
