The old pushrod housings leaked at the cyl end the new housings cure
this problem Glenn Putnam
On May 10, 2010, at 8:45 AM, Hartmut Beil wrote:
The only advantage of the spring loaded tubes is a much easier
access to the lifter inserts . But it is very rare that these need
servicing.
Hartmut
From: Jerry Ward
Sent: Monday, May 10, 2010 1:34 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [ercoupe-tech] Pushrod tube leak
And why is this better than just replacing the rubber seals around
the tubes for about $3 bucks each?... Jerry
May 10, 2010 06:31:25 AM, [email protected] wrote:
>
>
For those folks like me planning to stop an oil leak at the pushrod
tube, Aircraft
>Spruce now sells the Real Gasket solution for $289.95 which is
about $60-70 less
>than buying it from the Real Gasket folks. P/N is 08-04444 for the
4-cylinder kit
>which I ordered Friday.
>
> Mac McMahon
> N94184
> VKX Friendly, MD
>
>
