Hey Gene: A important thing to give to Univair is how many screws you have holding the assembly together. The gauges were made with both 6 and 12 screws. I also found that even though no gasket may have been used originally, that a total of three gaskets will help to keep the assembly from leaking. When assembling the unit, use some fuel resistant sealer such as SEALUBE, will help in avoiding the seepage. You can make your own gaskets from a fuel resistant material purchased from your local auto parts store. Lynn Nelsen In a message dated 7/5/2010 10:45:45 P.M. Eastern Daylight Time, [email protected] writes:
Hi All, I have a little something I'd like to address on my E..This is the wing tank fuel gauge cover. The gauge works, but the gauge is competely unreadable in flight.. Upon digging through all of my hardcopy parts manual and service manual, I can't find anything giving parts number information or a blow-up of the assembly. All that I have is that my parts manual references a page in a "service memo and service manual" for serial numbers 2623 through 3467 (mine is 4964) Does anyone have a scan of the updated parts page that they would be willing to share??? or Univair has a gauge cover (aluminum tank) 48119 on pg 3-12 of the 2009 catalog listed ... Is this the plastic cover that I need to replace, and is there anything else (gasket) that needs to be replaced to reassemble correctly??? thanks in advance, ///Gene
