Ah, thats the problem. because I can't do sandboxing in erlang sinan will step all over itself when you try to build it with itself.
If you are building sinan use the makefile to do all the bootstrapping. It builds a minimal version of sinan with erlc then does all the further building and testing with sinan itself. 2011/10/17 Tristan Sloughter <[email protected]>: > Na, that is me trying to build sinan itself. > > On Mon, Oct 17, 2011 at 7:07 PM, Eric Merritt <[email protected]> > wrote: >> >> When sinan itself blows up it defaults to putting out as much >> information as possible. This is opposed to a user or project issue >> where it tries to put something less verbose out. >> >> I just uploaded a new one, that works for both Jordan and Me. I >> suspect this is something strange going on in your local setup. Off >> the top of my head though, I am not quite sure what is wrong. >> >> What are you trying to build, not sinan right? >> >> On Mon, Oct 17, 2011 at 6:31 PM, Tristan Sloughter >> <[email protected]> wrote: >> > oh, and the end of the error: >> > {sin_task_build,build_source,6}, >> > {sin_task_build,do_build_source,7}, >> > {sin_task_build,'-build_app/4-fun-0-',7}, >> > {lists,foldl,3}, >> > {sin_task_build,build_app,4}, >> > {sin_task_build,'-build_apps/4-fun-0-',4}, >> > {lists,foldl,3}] >> > >> > 2011/10/17 Tristan Sloughter <[email protected]> >> >> >> >> The new escript you uploaded isn't working for me either so I'm trying >> >> to >> >> build sinan. >> >> When I run 'sinan escript' I get an error so large I can't even scroll >> >> back to see the beginning. So I redirected to a file and here is the >> >> beginning of the error: >> >> >> >> erl -pa /home/tristan/Devel/sinan/_build/sinan/lib/sinan-2.0.0/ebin -s >> >> sinan manual_star >> >> t -s sinan main -extra -s /home/tristan/Devel/sinan escript >> >> Eshell V5.8.4 (abort with ^G) >> >> 1> starting: depends >> >> 1> Using the following lib directories to resolve dependencies: >> >> 1> /home/tristan/Devel/sinan/_build/sinan/lib >> >> 1> /usr/local/Cellar/erlang/R14B03/lib/erlang/lib >> >> 1> /usr/local/lib/erlang/lib/ >> >> 1> /usr/local/agner/packages/ >> >> 1> /usr/local/lib/erlang/lib >> >> 1> /usr/local/agner/packages/ >> >> 1> starting: build >> >> 1> build problem error:undef:[{sin_compile_erl,build_file, >> >> [{sin_matcher, >> >> {sin_config, >> >> [{{start_dir,'*','*','*','*','*'}, >> >> "/home/tristan/Devel/sinan"}, >> >> >> >> {{project_vsn,'*','*','*','*','*'},"2.0.0"}, >> >> >> >> {{project_name,'*','*','*','*','*'},sinan}, >> >> {{ignore_dirs,'*','*','*','*','*'}, >> >> ["_",".","smoketests","features"]}, >> >> {{ignore_apps,'*','*','*','*','*'},[]}, >> >> {{escript,'*','*','*','*','*'}, >> >> [{include_apps, >> >> [erlware_commons,cucumberl,proper, >> >> getopt]}]}, >> >> {{dep_dirs,'*','*','*','*','*'}, >> >> ["/usr/local/lib/erlang/lib", >> >> "/usr/local/agner/packages/"]}, >> >> {{dep_constraints,'*','*','*','*','*'}, >> >> [{cucumberl,"0.0.4",gte}, >> >> {erlware_commons,"0.5.0",gte}, >> >> {getopt,"0.0.1",gte}]}, >> >> >> >> {{config_dir,'*','*','*','*','*'},"config"}, >> >> {{compile_args,'*','*','*','*','*'}, >> >> [debug_info,report_warnings]}, >> >> >> >> {{build_dir,'*','*','*','*','*'},"_build"}, >> >> >> >> {{additional_args,'*','*','*','*','*'},[]}]}, >> >> [{module, >> >> {module,sin_utils,erl, >> >> >> >> "/home/tristan/Devel/sinan/src/sin_utils.erl", >> >> {set,0,16,16,8,80,48, >> >> 2011/10/17 Eric Merritt <[email protected]> >> >>> >> >>> hey man. I am a big paryher. I paryh all the time. >> >>> >> >>> On Mon, Oct 17, 2011 at 12:43 PM, Tristan Sloughter >> >>> <[email protected]> wrote: >> >>> > Eric, are you doing paryhing now? :) >> >>> > >> >>> > On Mon, Oct 17, 2011 at 12:40 PM, Jordan Wilberding >> >>> > <[email protected]> >> >>> > wrote: >> >>> >> >> >>> >> Must have been some "paryh" ;) >> >>> >> >> >>> >> On Sat, Oct 15, 2011 at 5:25 PM, Eric Merritt >> >>> >> <[email protected]> >> >>> >> wrote: >> >>> >>> >> >>> >>> I, am at a weekend long bayvhekor paryh >> >>> >>> >> >>> >>> On Oct 15, 2011 4:47 PM, "Tristan Sloughter" >> >>> >>> <[email protected]> wrote: >> >>> >>>> >> >>> >>>> Any chance you'll be doing that sometime soon :). >> >>> >>>> I got my agner stuffed worked out and kerl working, the last >> >>> >>>> piece >> >>> >>>> for >> >>> >>>> having an awesome Erlang deployment setup to DotCloud is getting >> >>> >>>> this sinan >> >>> >>>> to work. >> >>> >>>> >> >>> >>>> 2011/10/15 Tristan Sloughter <[email protected]> >> >>> >>>>> >> >>> >>>>> Great, thanks. >> >>> >>>>> >> >>> >>>>> 2011/10/15 Eric Merritt <[email protected]> >> >>> >>>>>> >> >>> >>>>>> That had to be github. I will try to upload anotjet >> >>> >>>>>> >> >>> >>>>>> On Oct 15, 2011 12:38 PM, "Tristan Sloughter" >> >>> >>>>>> <[email protected]> wrote: >> >>> >>>>>> > >> >>> >>>>>> > The download is not working for me >> >>> >>>>>> > from https://github.com/erlware/sinan/downloads >> >>> >>>>>> > >> >>> >>>>>> > It gives some weird error about xml. >> >>> >>>>>> > >> >>> >>>>>> > 2011/10/15 Eric Merritt <[email protected]> >> >>> >>>>>> >> >> >>> >>>>>> >> I put it at the erlware sinan project not mine >> >>> >>>>>> >> >> >>> >>>>>> >> >> >>> >>>>>> >> On Oct 15, 2011 12:01 PM, "Tristan Sloughter" >> >>> >>>>>> >> <[email protected]> wrote: >> >>> >>>>>> >> > >> >>> >>>>>> >> > Also, what happened to the sinan download on github? >> >>> >>>>>> >> > >> >>> >>>>>> >> > >> >>> >>>>>> >> > On Sat, Oct 15, 2011 at 10:01 AM, Tristan Sloughter >> >>> >>>>>> >> > <[email protected]> wrote: >> >>> >>>>>> >> >> >> >>> >>>>>> >> >> Running 'sinan build' on a project is giving me the error >> >>> >>>>>> >> >> below. >> >>> >>>>>> >> >> Any ideas? >> >>> >>>>>> >> >> >> >>> >>>>>> >> >> escript: exception error: undefined function >> >>> >>>>>> >> >> sin_fs_resolver:format_exception/1 >> >>> >>>>>> >> >> in function sinan:do_task_full/3 >> >>> >>>>>> >> >> in call from sinan:do_task/3 >> >>> >>>>>> >> >> in call from sinan:do_build/2 >> >>> >>>>>> >> >> in call from escript:run/2 >> >>> >>>>>> >> >> in call from escript:start/1 >> >>> >>>>>> >> >> in call from init:start_it/1 >> >>> >>>>>> >> >> in call from init:start_em/1 >> >>> >>>>>> >> >> >> >>> >>>>>> >> >> >> >>> >>>>>> >> >> On Thu, Oct 6, 2011 at 10:05 AM, Eric Merritt >> >>> >>>>>> >> >> <[email protected]> wrote: >> >>> >>>>>> >> >>> >> >>> >>>>>> >> >>> Ok. I just uploaded a version that does the printing I >> >>> >>>>>> >> >>> talked >> >>> >>>>>> >> >>> about. You can download it at your convenience. >> >>> >>>>>> >> >>> >> >>> >>>>>> >> >>> On 10/06/11 at 09:50am, Tristan Sloughter wrote: >> >>> >>>>>> >> >>> > Yup, I do have R14B03 through brew which is then under >> >>> >>>>>> >> >>> > /usr/local/Cellar and >> >>> >>>>>> >> >>> > linked to. >> >>> >>>>>> >> >>> > >> >>> >>>>>> >> >>> > On Thu, Oct 6, 2011 at 9:45 AM, Eric Merritt >> >>> >>>>>> >> >>> > <[email protected]> wrote: >> >>> >>>>>> >> >>> > >> >>> >>>>>> >> >>> > > Out of curiousty your /usr/local/lib/erlang wouldn't >> >>> >>>>>> >> >>> > > happen >> >>> >>>>>> >> >>> > > to be >> >>> >>>>>> >> >>> > > built up with symlinks would it? I just encountered >> >>> >>>>>> >> >>> > > your >> >>> >>>>>> >> >>> > > problem >> >>> >>>>>> >> >>> > > because i install R14B04 and I actually use stow to >> >>> >>>>>> >> >>> > > handle >> >>> >>>>>> >> >>> > > these kinds >> >>> >>>>>> >> >>> > > of installs. so while /usr/local/lib/erlang/lib >> >>> >>>>>> >> >>> > > looks >> >>> >>>>>> >> >>> > > like >> >>> >>>>>> >> >>> > > it has >> >>> >>>>>> >> >>> > > everything in it sinan was actually resolving from >> >>> >>>>>> >> >>> > > /var/stow/otp_R14B04 while cucumberl and proper >> >>> >>>>>> >> >>> > > where >> >>> >>>>>> >> >>> > > in >> >>> >>>>>> >> >>> > > /var/stow/otp_R14B03. Just because of the way sinan >> >>> >>>>>> >> >>> > > was >> >>> >>>>>> >> >>> > > searching. >> >>> >>>>>> >> >>> > > >> >>> >>>>>> >> >>> > > >> >>> >>>>>> >> >>> > > On 10/05/11 at 01:27pm, Tristan Sloughter wrote: >> >>> >>>>>> >> >>> > > > Ok, thanks. I'll poke around tonight. >> >>> >>>>>> >> >>> > > > >> >>> >>>>>> >> >>> > > > On Wed, Oct 5, 2011 at 1:26 PM, Eric Merritt >> >>> >>>>>> >> >>> > > > <[email protected]> >> >>> >>>>>> >> >>> > > wrote: >> >>> >>>>>> >> >>> > > > >> >>> >>>>>> >> >>> > > > > Thats not sinan, Its escript. Sinan doesnt have >> >>> >>>>>> >> >>> > > > > any >> >>> >>>>>> >> >>> > > > > options about >> >>> >>>>>> >> >>> > > > > doing things differently unfortunately. You >> >>> >>>>>> >> >>> > > > > can't >> >>> >>>>>> >> >>> > > > > actually start a >> >>> >>>>>> >> >>> > > > > release in escript because escript is a release >> >>> >>>>>> >> >>> > > > > and >> >>> >>>>>> >> >>> > > > > its >> >>> >>>>>> >> >>> > > > > already >> >>> >>>>>> >> >>> > > > > started by the time you run your actual script. >> >>> >>>>>> >> >>> > > > > Right >> >>> >>>>>> >> >>> > > > > now escript is a >> >>> >>>>>> >> >>> > > > > bit hacky for that reason. >> >>> >>>>>> >> >>> > > > > >> >>> >>>>>> >> >>> > > > > The long term fix is to finish up jeringa or the >> >>> >>>>>> >> >>> > > > > OTP >> >>> >>>>>> >> >>> > > > > guys finish up >> >>> >>>>>> >> >>> > > > > stand alone erlang. In the short term you can >> >>> >>>>>> >> >>> > > > > use >> >>> >>>>>> >> >>> > > > > escript and start >> >>> >>>>>> >> >>> > > > > the release manually. It sucks but its the only >> >>> >>>>>> >> >>> > > > > option. >> >>> >>>>>> >> >>> > > > > >> >>> >>>>>> >> >>> > > > > On Wed, Oct 5, 2011 at 1:23 PM, Tristan >> >>> >>>>>> >> >>> > > > > Sloughter >> >>> >>>>>> >> >>> > > > > <[email protected]> wrote: >> >>> >>>>>> >> >>> > > > > > Cool. >> >>> >>>>>> >> >>> > > > > > And so the 'sinan escript' feature relies on >> >>> >>>>>> >> >>> > > > > > being >> >>> >>>>>> >> >>> > > > > > able to call a >> >>> >>>>>> >> >>> > > > > function: >> >>> >>>>>> >> >>> > > > > > project:main/1 >> >>> >>>>>> >> >>> > > > > > Correct? >> >>> >>>>>> >> >>> > > > > > It would be great if instead it could just >> >>> >>>>>> >> >>> > > > > > start >> >>> >>>>>> >> >>> > > > > > the >> >>> >>>>>> >> >>> > > > > > target system :) >> >>> >>>>>> >> >>> > > > > > Tristan >> >>> >>>>>> >> >>> > > > > > >> >>> >>>>>> >> >>> > > > > > On Wed, Oct 5, 2011 at 1:15 PM, Eric Merritt >> >>> >>>>>> >> >>> > > > > > <[email protected] >> >>> >>>>>> >> >>> > > > >> >>> >>>>>> >> >>> > > > > wrote: >> >>> >>>>>> >> >>> > > > > >> >> >>> >>>>>> >> >>> > > > > >> Ok. thats really good to know. I think what >> >>> >>>>>> >> >>> > > > > >> is >> >>> >>>>>> >> >>> > > > > >> going >> >>> >>>>>> >> >>> > > > > >> on is that >> >>> >>>>>> >> >>> > > > > >> because things are being distributed as an >> >>> >>>>>> >> >>> > > > > >> escript >> >>> >>>>>> >> >>> > > > > >> code:lib_dir >> >>> >>>>>> >> >>> > > isn't >> >>> >>>>>> >> >>> > > > > >> actually returning the lib dir of erts. Its >> >>> >>>>>> >> >>> > > > > >> returning the lib dir of >> >>> >>>>>> >> >>> > > > > >> the escript which isn't what we want at all. >> >>> >>>>>> >> >>> > > > > >> >> >>> >>>>>> >> >>> > > > > >> I need to think about that a little bit. To >> >>> >>>>>> >> >>> > > > > >> get >> >>> >>>>>> >> >>> > > > > >> it >> >>> >>>>>> >> >>> > > > > >> fixed. On a side >> >>> >>>>>> >> >>> > > > > >> note, sinan now respects the ERL_LIBS env >> >>> >>>>>> >> >>> > > > > >> variable, >> >>> >>>>>> >> >>> > > > > >> and that >> >>> >>>>>> >> >>> > > dep_dirs >> >>> >>>>>> >> >>> > > > > >> thing you just saw. >> >>> >>>>>> >> >>> > > > > >> >> >>> >>>>>> >> >>> > > > > >> On Wed, Oct 5, 2011 at 1:12 PM, Tristan >> >>> >>>>>> >> >>> > > > > >> Sloughter >> >>> >>>>>> >> >>> > > > > >> <[email protected]> wrote: >> >>> >>>>>> >> >>> > > > > >> > Hah, that fixed it! >> >>> >>>>>> >> >>> > > > > >> > >> >>> >>>>>> >> >>> > > > > >> > 2011/10/5 Eric Merritt >> >>> >>>>>> >> >>> > > > > >> > <[email protected]> >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> Thats good and its bad. Its good in that >> >>> >>>>>> >> >>> > > > > >> >> the >> >>> >>>>>> >> >>> > > > > >> >> version parser is >> >>> >>>>>> >> >>> > > not >> >>> >>>>>> >> >>> > > > > >> >> screwed up. Its bad in that its not >> >>> >>>>>> >> >>> > > > > >> >> finding >> >>> >>>>>> >> >>> > > > > >> >> proper as it should. >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> Hmm, this may be a pathing issue. I am not >> >>> >>>>>> >> >>> > > > > >> >> sure >> >>> >>>>>> >> >>> > > > > >> >> they we can test >> >>> >>>>>> >> >>> > > > > that. >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> add a piece to your config that looks as >> >>> >>>>>> >> >>> > > > > >> >> follows >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> {dep_dirs, ["<path to where ever proper >> >>> >>>>>> >> >>> > > > > >> >> is>"]}. >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> so if proper is in >> >>> >>>>>> >> >>> > > > > >> >> usr/local/lib/erlang/lib >> >>> >>>>>> >> >>> > > > > >> >> it >> >>> >>>>>> >> >>> > > > > >> >> would look like >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> {dep_dirs, ["/usr/local/lib/erlang/lib"]}. >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> Lets see what that results in. >> >>> >>>>>> >> >>> > > > > >> >> >> >>> >>>>>> >> >>> > > > > >> >> On Wed, Oct 5, 2011 at 1:01 PM, Tristan >> >>> >>>>>> >> >>> > > > > >> >> Sloughter >> >>> >>>>>> >> >>> > > > > >> >> <[email protected]> wrote: >> >>> >>>>>> >> >>> > > > > >> >> > I got rid of the other proper and >> >>> >>>>>> >> >>> > > > > >> >> > installed >> >>> >>>>>> >> >>> > > > > >> >> > proper 1.0 from >> >>> >>>>>> >> >>> > > master, >> >>> >>>>>> >> >>> > > > > >> >> > same >> >>> >>>>>> >> >>> > > > > >> >> > thing: >> >>> >>>>>> >> >>> > > > > >> >> > starting: depends >> >>> >>>>>> >> >>> > > > > >> >> > Unable to resolve compile time >> >>> >>>>>> >> >>> > > > > >> >> > dependencies, >> >>> >>>>>> >> >>> > > > > >> >> > probably do to the >> >>> >>>>>> >> >>> > > > > >> >> > following >> >>> >>>>>> >> >>> > > > > >> >> > constraints: >> >>> >>>>>> >> >>> > > > > >> >> > application proper in the project >> >>> >>>>>> >> >>> > > > > >> >> > constraint on proper with constraints >> >>> >>>>>> >> >>> > > > > >> >> > [proper] >> >>> >>>>>> >> >>> > > > > >> >> > originating >> >>> >>>>>> >> >>> > > from >> >>> >>>>>> >> >>> > > > > >> >> > these >> >>> >>>>>> >> >>> > > > > >> >> > application(s) ['__top_level__'] >> >>> >>>>>> >> >>> > > > > >> >> > build problem sin_task_depends:211 >> >>> >>>>>> >> >>> > > > > >> >> > [{failed, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {possible_culprit, >> >>> >>>>>> >> >>> > > > > >> >> > [proper, >> >>> >>>>>> >> >>> > > > > >> >> > {proper, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {set,1,16,16,8,80,48, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {[],[],[],[],[],[],[],[],[],[],[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[]}, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {{[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > [proper], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[],[],[],[],[],[],[],[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > []}}}, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {set,1,16,16,8,80,48, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {[],[],[],[],[],[],[],[],[],[],[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[],[]}, >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > {{[],[],[],[],[],[],[],[],[],[],[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > > > >> >> > [],[],[], >> >>> >>>>>> >> >>> > > > > >> >> > >> >>> >>>>>> >> >>> > > ['__top_level__']}}}}]}}] >> >>> >>>>>> >> >>> > > > > >> >> > On Wed, Oct 5, 2011 at 12:16 PM, Eric >> >>> >>>>>> >> >>> > > > > >> >> > Merritt >> >>> >>>>>> >> >>> > > > > >> >> > <[email protected]> >> >>> >>>>>> >> >>> > > > > >> >> > wrote: >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> This is the new dep solver stuff. I am >> >>> >>>>>> >> >>> > > > > >> >> >> actually happy you are >> >>> >>>>>> >> >>> > > > > >> >> >> hitting >> >>> >>>>>> >> >>> > > > > >> >> >> this error. its going to help get the >> >>> >>>>>> >> >>> > > > > >> >> >> error >> >>> >>>>>> >> >>> > > > > >> >> >> messaging right. >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> So what its saying there is that there >> >>> >>>>>> >> >>> > > > > >> >> >> is >> >>> >>>>>> >> >>> > > > > >> >> >> a >> >>> >>>>>> >> >>> > > > > >> >> >> dependency change >> >>> >>>>>> >> >>> > > > > >> >> >> starting >> >>> >>>>>> >> >>> > > > > >> >> >> at proper that is not being satisfied. >> >>> >>>>>> >> >>> > > > > >> >> >> So >> >>> >>>>>> >> >>> > > > > >> >> >> it >> >>> >>>>>> >> >>> > > > > >> >> >> might be proper >> >>> >>>>>> >> >>> > > or >> >>> >>>>>> >> >>> > > > > >> >> >> something that proper depends on. (Its >> >>> >>>>>> >> >>> > > > > >> >> >> hard >> >>> >>>>>> >> >>> > > > > >> >> >> for the system to >> >>> >>>>>> >> >>> > > know >> >>> >>>>>> >> >>> > > > > >> >> >> exactly in a back tracing search >> >>> >>>>>> >> >>> > > > > >> >> >> senario). >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Hmmm. I wonder if the 'alpha2' is the >> >>> >>>>>> >> >>> > > > > >> >> >> problem. >> >>> >>>>>> >> >>> > > > > >> >> >> That could be a >> >>> >>>>>> >> >>> > > > > bug, >> >>> >>>>>> >> >>> > > > > >> >> >> I >> >>> >>>>>> >> >>> > > > > >> >> >> may have to do some better version >> >>> >>>>>> >> >>> > > > > >> >> >> parsing. In >> >>> >>>>>> >> >>> > > > > >> >> >> any case, Do >> >>> >>>>>> >> >>> > > me a >> >>> >>>>>> >> >>> > > > > >> >> >> favor. There is a 1.0 version of proper >> >>> >>>>>> >> >>> > > > > >> >> >> out. >> >>> >>>>>> >> >>> > > > > >> >> >> Try installing >> >>> >>>>>> >> >>> > > that >> >>> >>>>>> >> >>> > > > > and >> >>> >>>>>> >> >>> > > > > >> >> >> lets see what happens >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> https://github.com/manopapad/proper.git >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> You should probably use that anyway, >> >>> >>>>>> >> >>> > > > > >> >> >> its >> >>> >>>>>> >> >>> > > > > >> >> >> quite >> >>> >>>>>> >> >>> > > > > >> >> >> a bit more >> >>> >>>>>> >> >>> > > advanced >> >>> >>>>>> >> >>> > > > > >> >> >> then the version you have. >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Eventually I want to break these things >> >>> >>>>>> >> >>> > > > > >> >> >> out >> >>> >>>>>> >> >>> > > > > >> >> >> into plugins so >> >>> >>>>>> >> >>> > > you if >> >>> >>>>>> >> >>> > > > > >> >> >> you >> >>> >>>>>> >> >>> > > > > >> >> >> dont need proper you dont have to have >> >>> >>>>>> >> >>> > > > > >> >> >> it. >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> oh and nuke your old proper. >> >>> >>>>>> >> >>> > > > > >> >> >> >> >>> >>>>>> >> >>> > > > > >> >> >> Thanks for bearing with me in this. You >> >>> >>>>>> >> >>> > > > > >> >> >> are my >> >>> >>>>>> >> >>> > > > > >> >> >> first non-me >> >>> >>>>>> >> >>> > > user >> >>> >>>>>> >> >>> > > > > of >> >>> >>>>>> >> >>> > > > > >> >> >> this version of sinan. >> >>> >>>>>> >> >>> > > > > >> >> >> On Wed, Oct 5, 2011 at 12:08 PM, >> >>> >>>>>> >> >>> > > > > >> >> >> Tristan >> >>> >>>>>> >> >>> > > > > >> >> >> Sloughter >> >>> >>>>>> >> >>> > > > > >> >> >> <[email protected]> wrote: >> >>> >>>>>> >> >>> > > > > >> >> >> > Note that the config file must be >> >>> >>>>>> >> >>> > > > > >> >> >> > named >> >>> >>>>>> >> >>> > > > > >> >> >> > sinan.config and not >> >>> >>>>>> >> >>> > > > > >> >> >> > sinan.cfg. >> >>> >>>>>> >> >>> > > > > >> >> >> > Once I got that fixed I get what >> >>> >>>>>> >> >>> > > > > >> >> >> > looks >> >>> >>>>>> >> >>> > > > > >> >> >> > to be >> >>> >>>>>> >> >>> > > > > >> >> >> > complaining I >> >>> >>>>>> >> >>> > > don't >> >>> >>>>>> >> >>> > > > > >> >> >> > have >> >>> >>>>>> >> >>> > > > > >> >> >> > proper. But I do: >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >>> >>>>>> >> >>> > > > > >> >> >> > >> >>> >>>>>> >> >>> > > > > >> >> >> > /usr/local/lib/erlang/lib/proper-0.0.1alpha2/ >> >>> >>>>>> >> >>> > > > > >> >> >> > λ sinan build >> >>> >>>>>> >> >>> > > > > >> >> >> > starting: depends >> >>> >>>>>> >> >>> > > > > >> >> >> > Unable to resolve compile time >> >>> >>>>>> >> >>> > > > > >> >> >> > dependencies, >> >>> >>>>>> >> >>> > > > > >> >> >> > probably do to >> >>> >>>>>> >> >>> > > the >> >>> >>>>>> >> >>> > > > > >> >> >> > following >> >>> >>>>>> >> >>> > > > > >> >> >> > constraints: >> >>> >>>>>> >> >>> > > > > >> >> >> > application proper in the project >> >>> >>>>>> >> >>> > > > > >> >>> >>>>>> >> >>> >>>>>> -- >> >>> >>>>>> You received this message because you are subscribed to the >> >>> >>>>>> Google >> >>> >>>>>> Groups "erlware-dev" group. >> >>> >>>>>> To post to this group, send email to >> >>> >>>>>> [email protected]. >> >>> >>>>>> To unsubscribe from this group, send email to >> >>> >>>>>> [email protected]. >> >>> >>>>>> For more options, visit this group at >> >>> >>>>>> http://groups.google.com/group/erlware-dev?hl=en. >> >>> >>>>> >> >>> >>>> >> >>> >>>> -- >> >>> >>>> You received this message because you are subscribed to the >> >>> >>>> Google >> >>> >>>> Groups "erlware-dev" group. >> >>> >>>> To post to this group, send email to >> >>> >>>> [email protected]. >> >>> >>>> To unsubscribe from this group, send email to >> >>> >>>> [email protected]. >> >>> >>>> For more options, visit this group at >> >>> >>>> http://groups.google.com/group/erlware-dev?hl=en. >> >>> >>> >> >>> >>> -- >> >>> >>> You received this message because you are subscribed to the Google >> >>> >>> Groups >> >>> >>> "erlware-dev" group. >> >>> >>> To post to this group, send email to [email protected]. >> >>> >>> To unsubscribe from this group, send email to >> >>> >>> [email protected]. >> >>> >>> For more options, visit this group at >> >>> >>> http://groups.google.com/group/erlware-dev?hl=en. >> >>> >> >> >>> >> -- >> >>> >> You received this message because you are subscribed to the Google >> >>> >> Groups >> >>> >> "erlware-dev" group. >> >>> >> To post to this group, send email to [email protected]. >> >>> >> To unsubscribe from this group, send email to >> >>> >> [email protected]. >> >>> >> For more options, visit this group at >> >>> >> http://groups.google.com/group/erlware-dev?hl=en. >> >>> > >> >>> > -- >> >>> > You received this message because you are subscribed to the Google >> >>> > Groups >> >>> > "erlware-dev" group. >> >>> > To post to this group, send email to [email protected]. >> >>> > To unsubscribe from this group, send email to >> >>> > [email protected]. >> >>> > For more options, visit this group at >> >>> > http://groups.google.com/group/erlware-dev?hl=en. >> >>> > >> >>> >> >>> -- >> >>> You received this message because you are subscribed to the Google >> >>> Groups >> >>> "erlware-dev" group. >> >>> To post to this group, send email to [email protected]. >> >>> To unsubscribe from this group, send email to >> >>> [email protected]. >> >>> For more options, visit this group at >> >>> http://groups.google.com/group/erlware-dev?hl=en. >> >>> >> >> >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "erlware-dev" group. >> > To post to this group, send email to [email protected]. >> > To unsubscribe from this group, send email to >> > [email protected]. >> > For more options, visit this group at >> > http://groups.google.com/group/erlware-dev?hl=en. >> > >> >> -- >> You received this message because you are subscribed to the Google Groups >> "erlware-dev" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/erlware-dev?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "erlware-dev" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/erlware-dev?hl=en. > -- You received this message because you are subscribed to the Google Groups "erlware-dev" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/erlware-dev?hl=en.
