Hallo, I am still not successful to install the network device using following COnfiguration: * Suse 11.0 with Kernel 2.6.25. * Ethercat 1.4.0 with 8239too driver taken from development stream 1.5 /etc/sysconfig/ethercat: MASTER0_DEVICE="00:50:fc:4c:87:45" DEVICE_MODULES="8139too"
dmesg after reboot: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:02:0b.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.28 PCI: Found IRQ 11 for device 0000:02:0b.0 PCI: Sharing IRQ 11 with 0000:02:0a.0 eth0: RealTek RTL8139 at 0xd8de8800, 00:50:fc:4c:87:45, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' PCI: Found IRQ 9 for device 0000:02:0c.0 PCI: Sharing IRQ 9 with 0000:00:1f.3 PCI: Sharing IRQ 9 with 0000:02:0a.1 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) parport_pc 00:10: reported by Plug and Play BIOS parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] gameport: CS46xx Gameport is pci0000:02:0c.0/gameport0, speed 1387kHz ppdev: user-space parallel port driver Adding 578332k swap on /dev/sda2. Priority:-1 extents:1 across:578332k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected] loop: module loaded fuse init (API version 7.9) powernow: This module only works with AMD K7 CPUs IA-32 Microcode Update Driver: v1.14a <[email protected]> EtherCAT: Master driver 1.4.0 r1611 EtherCAT: 1 master waiting for devices. ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.28, master 1.4.0 r1611 PCI: Found IRQ 11 for device 0000:02:0b.0 PCI: Sharing IRQ 11 with 0000:02:0a.0 ec_8139too 0000:02:0b.0: Invalid PCI mem region size(s), aborting Trying to free nonexistent resource <000000000000d800-000000000000d8ff> Trying to free nonexistent resource <00000000feaff800-00000000feaff8ff> NET: Registered protocol family 10 lo: Disabled Privacy Extensions /etc/init.d/ethercat stop EtherCAT: Master module cleaned up. 8139too Fast Ethernet driver 0.9.28 eth0: RealTek RTL8139 at 0xd8de8800, 00:50:fc:4c:87:45, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' What's the meaning of the above message: 'ec_8139too 0000:02:0b.0: Invalid PCI mem region size(s), aborting' ? Thanks Viktor -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01 _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
