Hi!
I'm new to etherlab, and in the process of setting up my first master.
My system.
OS: Fedora 12
Kernel: 2.6.31.5-127
Ethernet card: Intel Corporation 82567LF Gigabit Network Connection (rev 03)
Tried to set up the installation of ethercat 1.4.0 with the following
command:
/./configure --enable-e1000 --disable-8139too --enable-cycles/
This gave me the output:
/checking for Linux kernel sources...
/usr/src/kernels/2.6.31.12-174.2.3.fc12.i686 (Kernel
2.6.31.12-174.2.3.fc12.i686)
checking for kernel for e1000 driver... configure: error: kernel 2.6.31
not available for e1000 driver!/
The command /lsmod | grep e1000/, gives me this output:
/e1000e 133776 0
/When checking the web page i found that version 1.4.0 only supports the
driver up until kernel 2.6.24.
*THE QUESTION:* Should I somehow install kernel 2.6.24 on my system, or
try using the 1.5 master with kernel 2.6.29?
Appreciate any help...
//John
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
