Hi, On Wed, Mar 10, 2010 at 02:52:24PM -0000, Ian Norton wrote: > Still not working, but different response now. I only get a "n17" > error on the S300 display, where I used to get a "f23" error as well > which turned of power. > > attached are usuall files as well as sii_read.
we're getting very close now. The reason, why the slave won't go to OP is indeed, that the PDO sync managers (2 and 3) can't be configured because of the missing sync manager addresses in the SII. The sync manager category in the SII is mandatory and the slave does not conform to the standard if it is missing. The slave will moreover *not* pass the EtherCAT conformance test tool. You should tell the vendor about it, you can send them the link from my last posting. The FAQ entry I'm referencing via the link tells you, how you can add the missing data by yourself. -- Best regards, Florian Pose http://etherlab.org _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
