Hello, please send me the output of make VERBOSE=1 as well as the file kernel-cflags.c
Richard PS: Please do not contact us directly, but use the mailing list so that all can profit from the results On Monday 13 December 2010 16:11:46 you wrote: > Hallo Richard, > > kannst Du den beiden Antworten. > > Bemerke es sind Studenten des RTAILAB Entwicklers. > > Gruß > > Andreas > -------- Original-Nachricht -------- > Betreff: Etherlab-1.2rc10 make problem > Datum: Fri, 10 Dec 2010 16:49:11 +0100 > Von: Luca Bovino <luca.bov...@gmail.com> > An: a...@igh-essen.com > > > > Dear Dipl.-Ing. Andreas Stewering-Bone, > > we are two students from SUPSI in Manno (Swiss) and we are currently > working with an RTAI project. Our teacher Roberto Bucher told us that > we could write to you. > > We have to configure our laptop with Ethercat and Etherlab. > We successfully installed the first one, but we are encountering some > problems with Etherlab during the installation. > > When we try to run the "make" command, we get plenty of errors (see > attachment). > > Here are the specifics: > - RTAI Vulcano > - Kernel 2.6.29.4-ipipe > - Ethercat 1.4 > - Etherlab 1.2-rc10 > > We really don't know what the problem could be. > > Could you tell us what kernel and etherlab release do we have to use? > > > Thank you for the attention, > > best regards > -- ------------------------------------------------------------------------ Richard Hacker Amtsgericht Essen HRB 11500 Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722 Ges. für Ingenieurleistungen mbH Geschäftsführung: Heinz-Baecker-Str. 34 Dr.-Ing. S. Rotthäuser D-45356 Essen Dr.-Ing. T. Finke Tel.: +49 201 / 36014-16 Dr.-Ing. W. Hagemeister Fax.: +49 201 / 36014-14 Tel.: +49 201 / 360-14-0 richard.hac...@igh-essen.com http://www.igh-essen.com ------------------------------------------------------------------------ _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users