please provide dmesg output ________________________________________ From: Jun Yuan [[email protected]] Sent: Wednesday, December 12, 2012 10:06 AM To: [email protected] Cc: [email protected] Subject: Re: [etherlab-users] about issue e1000 driver
Hello 갑겸, do you mean that you're developing a proprietary closed-source EtherCAT Master besides the etherlab, but trying to use the NIC driver code from the etherlab? My old professor had told me once, if your software suddenly stops working, it is always the cables to blame. Since your linux kernel is 2.6.18 based, why not use the e1000 driver 2.6.18 but 2.6.20? Regards, Jun On Wed, Dec 12, 2012 at 7:17 AM, 김갑겸 <[email protected]<mailto:[email protected]>> wrote: Hello, etherLab users. We are developing an EtherCAT Master, using a NIC(intel pro1000) with Montavista Linux. Our NIC driver is etherLab's and found some problems. The problem is that NIC can not recevie ethernet frames suddenly after working well for almost two days. Did someone else meet the similar problems? [ our system spec ] - CPU : x86 ,Intel Atom N270 1.6GHz - NIC : e1000(Intel 82541PI Gigabit Ethernet) - Kernel : Montavista Pro5.0 (Linux 2.6.18 based) - NIC D/D : etherlab's e1000 driver (2.6.20) _______________________________________________ etherlab-users mailing list [email protected]<mailto:[email protected]> http://lists.etherlab.org/mailman/listinfo/etherlab-users -- Jun Yuan [Aussprache: Djün Üän] Robotics Technology Leaders GmbH Am Loferfeld 58, D-81249 München Tel: +49 89 189 0465 24 Mobile: +49 176 2176 5238 Fax: +49 89 189 0465 11 mailto: [email protected]<mailto:[email protected]> Umlautregel in der chinesischen Lautschrift Pinyin: Nach den Anlauten y, j, q, und x wird u als ü ausgesprochen, z.B. yu => ü, ju => dschü, qu => tschü, xu => schü. _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
