Hi,
I am currently writing software to use the Beckhoff EL2502 module. Using the
cstruct output of the etherlab tool, I get the following pdo configuration:
/* Master 0, Slave 7, "EL2502"
* Vendor ID: 0x00000002
* Product code: 0x09c63052
* Revision number: 0x00170000
*/
ec_pdo_entry_info_t slave_7_pdo_entries[] = {
{0x7000, 0x11, 16}, /* PWM output */
{0x7010, 0x11, 16}, /* PWM output */
};
ec_pdo_info_t slave_7_pdos[] = {
{0x1600, 1, slave_7_pdo_entries + 0}, /* PWM RxPDO-Map Ch.1 */
{0x1601, 1, slave_7_pdo_entries + 1}, /* PWM RxPDO-Map Ch.2 */
};
ec_sync_info_t slave_7_syncs[] = {
{0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
{1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{2, EC_DIR_OUTPUT, 2, slave_7_pdos + 0, EC_WD_DISABLE},
{3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{0xff}
};
After reading through some of the beckhoff documentation, I changed my
structures to accommodate the channel period registers...(I believe it is
firmware specific).
// EL2502 PDO entries
ec_pdo_entry_info_t EL2502_pdo_entries[] = {
{0x7000, 0x11, 16}, /* PWM CH1 output */
{0x7000, 0x12, 16}, /* PWM CH1 period */
{0x7010, 0x11, 16}, /* PWM CH2 output */
{0x7010, 0x12, 16}, /* PWM CH2 period */
};
// EL2502 PDOs
ec_pdo_info_t EL2502_pdos[] = {
{0x1602, 1, EL2502_pdo_entries + 0}, /* PWM RxPDO-Map Ch.1 */
{0x1603, 1, EL2502_pdo_entries + 2}, /* PWM RxPDO-Map Ch.2 */
};
// EL2502 sync
ec_sync_info_t EL2502_syncs[] = {
{0, EC_DIR_OUTPUT, 0, NULL, EC_WD_DISABLE},
{1, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{2, EC_DIR_OUTPUT, 2, EL2502_pdos + 0, EC_WD_DISABLE},
{3, EC_DIR_INPUT, 0, NULL, EC_WD_DISABLE},
{0xff}
};
Has anyone ever set the frequency and pulse width of the ouput signal on either
channel using pdo's? My project requires changing the pulse frequency and the
pulse width on the fly and I was wondering if I can accomplish this using the
pdo's. Does anyone else have different c structures they are using?
Thank you!
-Derrill
_______________________________________________
etherlab-users mailing list
[email protected]
http://lists.etherlab.org/mailman/listinfo/etherlab-users
