Hi mike, I understand that. This is a totallyu different question and pertains to ethernet.
I am just trying to find out on a normal ethernet network with 2 interfaces whether a IP routing takes place. I am using a raw socket and seem to packets even though ifconfig does not show any increase in Rx Packets. Thanks, Sriram On Tue, Feb 14, 2017 at 4:34 PM, Mike O'Connor <m...@oeg.com.au> wrote: > On 14/02/2017 9:18 PM, Sriram V wrote: >> Hello Mike, >> >> I tried running a simple packet sniffer on a Laptop with 2 ethernet >> interfaces. Still i am seeing the same behaviour. >> >> On my laptop, I have 2 network interfaces eth0 and eth1. eth0 is the >> lan and eth1 is the wlan. > > The Ethercat link must be on its own with a direct cable between the > PC's Ethernet and the EtherCAT device, which if needed is then daisy > chain to the next EtherCAT device. > > Mike _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
