Hey Mike Is this source inclues Gavin Lambert fixes as well ? On Mon, Sep 19, 2022 at 2:26 PM Mike O'Connor <m...@oeg.com.au> wrote:
> Hi Henrik > > I think you should really look at the work done at > > https://build.opensuse.org/package/show/home:bone11111:branches:science:EtherLab/ethercat > You use this to download all the packages and tool as binaries, removing > your issues. > > Cheers > Mike > > > On 19/9/2022 8:47 pm, Henrik Barie wrote: > > Hello Mike and Andreas, > > > > at this location I could only find the ethercatctl-file. > > However I think I found the right file now in > > /usr/src/etherlanmaster-code/tools. The file is named "ethercat" and I > > also found several .o-files with etherlab commands like "master". > > Executing it with sudo ./ethercat master worked and the output was > > (after starting with "systemctl start ethercat"): > > > > > > Master0 > > Phase: Idle > > Active: no > > Slaves: 4 > > Ethernet devices: > > Main: 88:a4:c2:bf:73:10 (attached) > > Link: UP > > Tx frames: 45398 > > Tx bytes: 2782824 > > Rx frames: 45397 > > Rx bytes: 2782764 > > Tx errors: 0 > > Tx frame rate [1/s]: 479 662 523 > > Tx rate [KByte/s]: 28.1 39.2 31.3 > > Rx frame rate [1/s]: 479 662 523 > > Rx rate [KByte/s]: 28.1 39.2 31.3 > > Common: > > Tx frames: 45398 > > Tx bytes: 2782824 > > Rx frames: 45397 > > Rx bytes: 2782764 > > Lost frames: 0 > > Tx frame rate [1/s]: 479 662 523 > > Tx rate [KByte/s]: 28.1 39.2 31.3 > > Rx frame rate [1/s]: 479 662 523 > > Rx rate [KByte/s]: 28.1 39.2 31.3 > > Loss rate [1/s]: 0 -0 0 > > Frame loss [%]: 0.0 -0.0 0.0 > > Distributed clocks: > > Reference clock: Slave 0 > > DC reference time: 0 > > Application time: 0 > > 2000-01-01 00:00:00.000000000 > > > > and for "slaves": > > > > 0:0 PREOP + EK1100 EtherCAT-Koppler (2A E-Bus) > > 1 0:1 PREOP + EL1104 4K. Dig. Eingang 24V, 3ms, Sensorversorgung > > 2 0:2 PREOP + EL2004 4K. Dig. Ausgang 24V, 0.5A > > 3 0:3 PREOP + EL3062 2K.Ana. Eingang 0-10V > > > > > > I tried my Simulink Model again but it still doesnt work. > > I will attach a Screenshot of it. > > > > I attached a cable from Input 2 of EL1104 (which is +24 V) to Output 1 > > of EL2004. The LED of EL2004 Output should now be on since it recieves > > 24V. > > > > I used Slave Index 1 for the EL1104 and Index 2 for the EL2004 as it > > was shown in the Terminal. > > > > Master is 0 and Vector Outputs enabled. > > > > Also the Master State-Module doesnt show any outputs. > > > > > > > > Regards > > Henrik > > > > > > -- > Etherlab-users mailing list > Etherlab-users@etherlab.org > https://lists.etherlab.org/mailman/listinfo/etherlab-users >
-- Etherlab-users mailing list Etherlab-users@etherlab.org https://lists.etherlab.org/mailman/listinfo/etherlab-users
