Rob,
I believe that the 8029 is a 10Mb card only, but I know of no way to tell for sure.
Garl
Rob Hudson wrote:
> Is there any way to tell if you have a network card capable of 100
> Mbps for a 100-base-T network?
>
> I've got a Realtek RTL-8029 (NE2000 compat, PCI) card. It won't
> connect to the network as 100 base, but I was curious if there was
> another way to find out.
>
> My ifconfig shows this:
>
> eth0 Link encap:Ethernet HWaddr 00:80:AD:38:6B:04
> inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:3047999 errors:0 dropped:0 overruns:0 frame:117
> TX packets:3051844 errors:346 dropped:0 overruns:0 carrier:692
> collisions:87761 txqueuelen:100
> RX bytes:2360189199 (2250.8 Mb) TX bytes:1064362386 (1015.0 Mb)
> Interrupt:11 Base address:0x1020
>
> I thought maybe it would say something there. dmesg doesn't tell me
> too much about it...
>
> ne2k-pci.c: v1.02 for Linux 2.2, 10/19/2000, D. Becker/P. Gortmaker,
>http://www.scyld.com/network/ne2k-pci.html
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x1020, IRQ 11.
> eth0: RealTek RTL-8029 found at 0x1020, IRQ 11, 00:80:AD:38:6B:04.
>
> Thanks,
> Rob
>
> Random Quote:
> ------------
> There is no reason anyone would want a computer in their home.
> - Ken Olson, president, chairman and founder of Digital Equipment Corp., 1977
--
=============================================================================
Garl R. Grigsby
Senior Customer Applications Engineering - Analysis Team
-----------------------------------------------------------------------------
Structural Dynamics Research Corporation Phone: (800)242-7372
TAO Americas Support Center FAX: (541)342-8277
1750 Willow Creek Circle Email: [EMAIL PROTECTED]
Eugene, OR 97402 Internet: http://www.sdrc.com
=============================================================================
-FEA makes a good engineer great, and a poor engineer dangerous-
=============================================================================
