Is your card a combo card? Does it have a RJ45 port and a coax port? If so, it is
only 10-base-T.
We have a card here with a RTL-8029 chip on it. It is only 10-base-T.
>>> [EMAIL PROTECTED] 7/23/2001 4:09:53 PM >>>
Is there any way to tell if you have a network card capable of 100
Mbps for a 100-base-T network?
I've got a Realtek RTL-8029 (NE2000 compat, PCI) card. It won't
connect to the network as 100 base, but I was curious if there was
another way to find out.
My ifconfig shows this:
eth0 Link encap:Ethernet HWaddr 00:80:AD:38:6B:04
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3047999 errors:0 dropped:0 overruns:0 frame:117
TX packets:3051844 errors:346 dropped:0 overruns:0 carrier:692
collisions:87761 txqueuelen:100
RX bytes:2360189199 (2250.8 Mb) TX bytes:1064362386 (1015.0 Mb)
Interrupt:11 Base address:0x1020
I thought maybe it would say something there. dmesg doesn't tell me
too much about it...
ne2k-pci.c: v1.02 for Linux 2.2, 10/19/2000, D. Becker/P. Gortmaker,
http://www.scyld.com/network/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x1020, IRQ 11.
eth0: RealTek RTL-8029 found at 0x1020, IRQ 11, 00:80:AD:38:6B:04.
Thanks,
Rob
Random Quote:
------------
There is no reason anyone would want a computer in their home.
- Ken Olson, president, chairman and founder of Digital Equipment Corp., 1977
