> On 20010723.1656, Bob Crandell said ...
>
> Is your card a combo card? Does it have a RJ45 port and a coax port? If so, it is
>only 10-base-T.
Yup. Are all combo cards only 10-base-T?
I wasn't sure if Linux's ifconfig showed 100-base-T selected or not.
On my firewall which has FreeBSD, it shows this. Note the line that
says 'media'. I'm not sure if Linux has this or not:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::260:8ff:fe1c:607e%xl0 prefixlen 64 scopeid 0x1
inet 65.4.49.159 netmask 0xffffff00 broadcast 65.4.49.255
ether 00:60:08:1c:60:7e
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP
<full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.254 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::248:54ff:fe66:5cb8%rl0 prefixlen 64 scopeid 0x2
ether 00:48:54:66:5c:b8
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP
<full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
-Rob
