We figured it out. It was ICS messing up the routing on the 192.168.0.0 subnet the whole time. Let me state again that I HATE ICS. Thanks for teh help guys.
--------------<<<((((((0))))))>>>-------------- Leo Clark [EMAIL PROTECTED] On Tue, 9 Oct 2001, Jacob Meuser wrote: > On Tue, Oct 09, 2001 at 01:38:10PM -0700, Leo Clark wrote: > > > We each have our own DSL lines and nat gateways to share the connection > > between the various boxes on our networks. > > > We are useing three subnets. One for my house, one for the wireless > > network, and one for my friend's house. > > > A little diagram, for my own clarity > > ISP------NET------ISP > | | > net0-nat0 nat1-net1 > | | > wigate0--------winet--------wigate1 > > > net0 - 10.0.0.0/24 > net1 - 192.168.1.0/24 > # hypothetical > winet - 172.16.0.0/24 > wigate0 - 10.0.0.101/32 && 172.16.0.1/32 > wigate1 - 192.168.1.101/32 && 172.16.0.2/32 > > > > We got all his routes set properly and his OpenBSD wireless gateway seamed > > great too. Until we tried to route packets through it. It refuses to > > pass anything though it. I have it sitting on both networks and talking > > on them fine. It can see and talk with the other wireless gateway box, > > and it can talk through that one to get to my network. It can also use > > the wired nic to get to anything on my friends network. The wireless > > laptop also talks just fine with it. But no one can use it as a gateway, > > if I set the laptop to use it as it's default route I can't see > > anything. If I try to access 192.168.0/24 (my friends subnet) from my > > subnet (10.0.0/24) my packets get stuck in his wireless gateway. If one > > of his boxes try to ping my wireless gateway, or even a wireless laptop in > > range, the packets get stoped at the wireless gateway box. > > You see packets arriving at wigate1 with tcpdump, but no forwarding, > correct? > > > I checked sysctl.conf and use the sysctl command to set > > net.inet.ip.forwarding=1 but still not avail. It can talk on both > > networks just fine. I don't have IPF running nor do I want it to right > > now. I would like to just get it up before playing with security and > > breaking it again. > > I assume no NAT either? > > > The routing tables are correct, and everything looks right. Is there > > something I missed? Is there something else in OpenBSD (i'm running 2.9 > > release BTW) that could stop this from working? I have a fairly plain > > install. Basicly all I did from first boot was to add the extra routes, > > add some users, modify sysctl.conf, and fix up the hosts file. > > should just need net.inet.ip.forwarding=1 and the routes > > > I can't understand what I did diffrent on my box that makes it work that > > could be diffrent then his. I'm really at a loss here. I would aprechate > > any ideas. Thanks! > > Perhaps something with /etc/mygate in wigate1? That's just a wild > guess. Have you actually tried diffing /etc on the machines to see if > perhaps you made some kind of typo (since all you'll see is what you've > changed)? > > -- > <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> >
