On Tue, Aug 12, 2003 at 02:14:50AM +0000, Bob Crandell wrote: > What do you get if run vkeybd from a command prompt? Does the sound work from other > programs? Do you have rights? > > What does vkeybd do?
vkeybd is a virtual midi keyboard. http://www.alsa-project.org/~iwai/alsa.html#vkeybd http://www.gentoo.org/dyn/pkgs/media-sound/vkeybd.xml Other (basic) sound apps work. exp2:~$ vkeybd --addr 65:0 check: a check: z check: s check: x check: c check: f check: v check: g check: b check: n check: j check: m check: k check: comma check: l check: period check: slash check: apostrophe check: backslash check: grave check: a check: z check: s check: x check: c check: f check: v check: g check: b check: n check: j check: m check: k check: comma check: l check: period check: slash check: apostrophe check: backslash check: grave ^C exp2:~$ exp2:~$ dmesg Linux version 2.4.20-gentoo-r5 ([EMAIL PROTECTED]) (gcc version 3.2.2) #1 Sat Jun 21 19:29:28 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001c000000 (usable) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 448MB LOWMEM available. On node 0 totalpages: 114688 zone(0): 4096 pages. zone(1): 110592 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1659.323 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3309.56 BogoMIPS Memory: 447116k/458752k available (2120k kernel code, 9072k reserved, -2472k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2000+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1659.1159 MHz. ..... host bus clock speed is 265.2384 MHz. cpu: 0, clocks: 1327384, slice: 663692 CPU0<T0:1327376,T1:663680,D:4,S:663692,C:1327384> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router SIS [1039/0008] at 00:01.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 udf: registering filesystem parport0: PC-style at 0x378 [PCSPP,TRISTATE] sisfb: Framebuffer at 0xc0000000, mapped to 0xdc804000, size 65536k sisfb: MMIO at 0xcfee0000, mapped to 0xe0805000, size 128k sisfb: Memory heap starting at 12288K sisfb: SiS301LVX bridge detected (revision 0xff) sisfb: Mode is 800x600x8 (60Hz) sisfb: CRT2 is disabled sisfb: Added MTRRs Console: switching to colour frame buffer device 100x37 sisfb: Installed SISFB_GET_INFO ioctl (80046ef8) sisfb: 2D acceleration is enabled, scrolling mode ypan fb0: SIS 730 frame buffer device, Version 1.5.07 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A lp0: using parport0 (polling). Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 01 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS730 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6E030L0, ATA DISK drive hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive hdd: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c0182564, I/O limit 4095Mb (mask 0xffffffff) hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 p4: <openbsd: p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) sis900.c: v1.08.06 9/24/2002 PCI: Found IRQ 3 for device 00:01.1 eth0: Unknown PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 3, 00:0a:e6:49:7f:59. Linux video capture interface: v1.00 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 381M agpgart: Detected SiS 730 chipset agpgart: AGP aperture is 64M @ 0xd0000000 [drm] AGP 0.99 on SiS @ 0xd0000000 64MB [drm] Initialized sis 1.0.0 20010503 on minor 0 SCSI subsystem driver Revision: 1.00 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 5 for device 00:01.3 PCI: Sharing IRQ 5 with 00:01.2 usb-ohci.c: USB OHCI at membase 0xe083e000, IRQ 5 usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Found IRQ 5 for device 00:01.2 PCI: Sharing IRQ 5 with 00:01.3 usb-ohci.c: USB OHCI at membase 0xe0840000, IRQ 5 usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver cryptoapi: loaded cryptoapi: Registered aes-ecb (0) cryptoapi: Registered aes-cbc (65536) cryptoapi: Registered aes-cfb (131072) cryptoapi: Registered aes-ctr (262144) cryptoapi: Registered aes-rtc (524288) cryptoapi: Registered blowfish-ecb (0) cryptoapi: Registered blowfish-cbc (65536) cryptoapi: Registered blowfish-cfb (131072) cryptoapi: Registered blowfish-ctr (262144) cryptoapi: Registered blowfish-rtc (524288) cryptoapi: Registered des-ecb (0) cryptoapi: Registered des-cbc (65536) cryptoapi: Registered des-cfb (131072) cryptoapi: Registered des-ctr (262144) cryptoapi: Registered des-rtc (524288) cryptoapi: Registered twofish-ecb (0) cryptoapi: Registered twofish-cbc (65536) cryptoapi: Registered twofish-cfb (131072) cryptoapi: Registered twofish-ctr (262144) cryptoapi: Registered twofish-rtc (524288) cryptoapi: Registered md5 (0) cryptoapi: Registered sha1 (0) cryptoloop: loaded systrace: systrace initialized kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Adding Swap: 248996k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal PCI: Found IRQ 11 for device 00:01.4 spurious 8259A interrupt: IRQ7. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: ATAPI Model: CD-ROM MARY500 Rev: 1.21 Type: CD-ROM ANSI SCSI revision: 02 Vendor: SONY Model: CD-RW CRX175E2 Rev: S002 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 58x/58x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr1: mmc-3 profile capable, current profile: 0h sisfb: Change mode to 800x600x8-60Hz sisfb: CRT2 is disabled eth0: no IPv6 routers present exp2:~$ lsmod Module Size Used by Not tainted snd-trident-synth 8844 1 (autoclean) snd-seq-midi-emul 5376 0 (autoclean) [snd-trident-synth] snd-mixer-oss 13848 1 (autoclean) ide-cd 30472 0 (autoclean) sr_mod 18264 0 (unused) cdrom 29408 0 [ide-cd sr_mod] ide-scsi 8880 0 snd-ainstr-simple 2340 0 [snd-trident-synth] snd-seq-instr 6192 0 [snd-trident-synth] snd-seq-midi 4160 0 (unused) snd-seq-midi-event 3592 0 [snd-seq-midi] snd-seq 40304 1 [snd-trident-synth snd-seq-midi-emul snd-seq-instr snd-seq-midi snd-seq-midi-event] snd-trident 28252 1 [snd-trident-synth] snd-pcm 65024 0 [snd-trident] snd-timer 15912 0 [snd-seq snd-pcm] snd-util-mem 1408 0 [snd-trident] snd-page-alloc 5292 0 [snd-trident-synth snd-trident snd-pcm] snd-mpu401-uart 3808 0 [snd-trident] snd-rawmidi 15072 0 [snd-seq-midi snd-mpu401-uart] snd-seq-device 4448 0 [snd-trident-synth snd-seq-midi snd-seq snd-trident snd-rawmidi] snd-ac97-codec 37888 0 [snd-trident] snd 32644 0 [snd-mixer-oss snd-seq-instr snd-seq-midi snd-seq-midi-event snd-seq snd-trident snd-pcm snd-timer snd-util-mem snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec] soundcore 4164 3 [snd] -- <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> _______________________________________________ EuG-LUG mailing list [EMAIL PROTECTED] http://mailman.efn.org/cgi-bin/listinfo/eug-lug
