Bummer.  I was hoping for some feedback from running it from the command prompt.
Nothing in /var/log/messages, /var/log/syslog or /var/log/debug?

Jacob Meuser ([EMAIL PROTECTED]) wrote:
>
>On Tue, Aug 12, 2003 at 02:14:50AM +0000, Bob Crandell wrote:
>> What do you get if run vkeybd from a command prompt?  Does the sound work from other
>> programs?  Do you have rights?
>>
>> What does vkeybd do?
>
>vkeybd is a virtual midi keyboard.
>
>http://www.alsa-project.org/~iwai/alsa.html#vkeybd
>http://www.gentoo.org/dyn/pkgs/media-sound/vkeybd.xml
>
>Other (basic) sound apps work.
>
>exp2:~$ vkeybd --addr 65:0
>check: a
>check: z
>check: s
>check: x
>check: c
>check: f
>check: v
>check: g
>check: b
>check: n
>check: j
>check: m
>check: k
>check: comma
>check: l
>check: period
>check: slash
>check: apostrophe
>check: backslash
>check: grave
>check: a
>check: z
>check: s
>check: x
>check: c
>check: f
>check: v
>check: g
>check: b
>check: n
>check: j
>check: m
>check: k
>check: comma
>check: l
>check: period
>check: slash
>check: apostrophe
>check: backslash
>check: grave
>^C
>exp2:~$
>
>exp2:~$ dmesg
>Linux version 2.4.20-gentoo-r5 ([EMAIL PROTECTED]) (gcc version 3.2.2)
#1 Sat Jun 21 19:29:28 PDT 2003
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>448MB LOWMEM available.
>On node 0 totalpages: 114688
>zone(0): 4096 pages.
>zone(1): 110592 pages.
>zone(2): 0 pages.
>Kernel command line: root=/dev/hda3
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>Initializing CPU#0
>Detected 1659.323 MHz processor.
>Console: colour VGA+ 80x25
>Calibrating delay loop... 3309.56 BogoMIPS
>Memory: 447116k/458752k available (2120k kernel code, 9072k reserved, -2472k data,
136k init, 0k highmem)
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
>CPU: AMD Athlon(tm) XP 2000+ stepping 02
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 1659.1159 MHz.
>..... host bus clock speed is 265.2384 MHz.
>cpu: 0, clocks: 1327384, slice: 663692
>CPU0<T0:1327376,T1:663680,D:4,S:663692,C:1327384>
>mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
>mtrr: detected mtrr type: Intel
>PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Using IRQ router SIS [1039/0008] at 00:01.0
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
>Starting kswapd
>VFS: Diskquotas version dquot_6.4.0 initialized
>Journalled Block Device driver loaded
>devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
>devfs: boot_options: 0x1
>udf: registering filesystem
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>sisfb: Framebuffer at 0xc0000000, mapped to 0xdc804000, size 65536k
>sisfb: MMIO at 0xcfee0000, mapped to 0xe0805000, size 128k
>sisfb: Memory heap starting at 12288K
>sisfb: SiS301LVX bridge detected (revision 0xff)
>sisfb: Mode is 800x600x8 (60Hz)
>sisfb: CRT2 is disabled
>sisfb: Added MTRRs
>Console: switching to colour frame buffer device 100x37
>sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
>sisfb: 2D acceleration is enabled, scrolling mode ypan
>fb0: SIS 730 frame buffer device, Version 1.5.07
>pty: 256 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>lp0: using parport0 (polling).
>Real Time Clock Driver v1.10e
>Non-volatile memory driver v1.2
>Uniform Multi-Platform E-IDE driver Revision: 6.31
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller on PCI bus 00 dev 01
>SIS5513: chipset revision 208
>SIS5513: not 100% native mode: will probe irqs later
>SiS730
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
>hda: Maxtor 6E030L0, ATA DISK drive
>hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
>hdd: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>blk: queue c0182564, I/O limit 4095Mb (mask 0xffffffff)
>hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(100)
>Partition check:
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
> p4: <openbsd: p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 >
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>loop: loaded (max 8 devices)
>sis900.c: v1.08.06 9/24/2002
>PCI: Found IRQ 3 for device 00:01.1
>eth0: Unknown PHY transceiver found at address 1.
>eth0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 3, 00:0a:e6:49:7f:59.
>Linux video capture interface: v1.00
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 381M
>agpgart: Detected SiS 730 chipset
>agpgart: AGP aperture is 64M @ 0xd0000000
>[drm] AGP 0.99 on SiS @ 0xd0000000 64MB
>[drm] Initialized sis 1.0.0 20010503 on minor 0
>SCSI subsystem driver Revision: 1.00
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>PCI: Found IRQ 5 for device 00:01.3
>PCI: Sharing IRQ 5 with 00:01.2
>usb-ohci.c: USB OHCI at membase 0xe083e000, IRQ 5
>usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] 7001 (#2)
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 3 ports detected
>PCI: Found IRQ 5 for device 00:01.2
>PCI: Sharing IRQ 5 with 00:01.3
>usb-ohci.c: USB OHCI at membase 0xe0840000, IRQ 5
>usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001
>usb.c: new USB bus registered, assigned bus number 2
>hub.c: USB hub found
>hub.c: 3 ports detected
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 65536)
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>IPv6 v0.8 for NET4.0
>IPv6 over IPv4 tunneling driver
>cryptoapi: loaded
>cryptoapi: Registered aes-ecb (0)
>cryptoapi: Registered aes-cbc (65536)
>cryptoapi: Registered aes-cfb (131072)
>cryptoapi: Registered aes-ctr (262144)
>cryptoapi: Registered aes-rtc (524288)
>cryptoapi: Registered blowfish-ecb (0)
>cryptoapi: Registered blowfish-cbc (65536)
>cryptoapi: Registered blowfish-cfb (131072)
>cryptoapi: Registered blowfish-ctr (262144)
>cryptoapi: Registered blowfish-rtc (524288)
>cryptoapi: Registered des-ecb (0)
>cryptoapi: Registered des-cbc (65536)
>cryptoapi: Registered des-cfb (131072)
>cryptoapi: Registered des-ctr (262144)
>cryptoapi: Registered des-rtc (524288)
>cryptoapi: Registered twofish-ecb (0)
>cryptoapi: Registered twofish-cbc (65536)
>cryptoapi: Registered twofish-cfb (131072)
>cryptoapi: Registered twofish-ctr (262144)
>cryptoapi: Registered twofish-rtc (524288)
>cryptoapi: Registered md5 (0)
>cryptoapi: Registered sha1 (0)
>cryptoloop: loaded
>systrace: systrace initialized
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Mounted devfs on /dev
>Freeing unused kernel memory: 136k freed
>Adding Swap: 248996k swap-space (priority -1)
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
>PCI: Found IRQ 11 for device 00:01.4
>spurious 8259A interrupt: IRQ7.
>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: ATAPI     Model: CD-ROM  MARY500   Rev: 1.21
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>  Vendor: SONY      Model: CD-RW  CRX175E2   Rev: S002
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
>sr0: scsi3-mmc drive: 58x/58x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.12
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr1: mmc-3 profile capable, current profile: 0h
>sisfb: Change mode to 800x600x8-60Hz
>sisfb: CRT2 is disabled
>eth0: no IPv6 routers present
>
>
>exp2:~$ lsmod
>Module                  Size  Used by    Not tainted
>snd-trident-synth       8844   1 (autoclean)
>snd-seq-midi-emul       5376   0 (autoclean) [snd-trident-synth]
>snd-mixer-oss          13848   1 (autoclean)
>ide-cd                 30472   0 (autoclean)
>sr_mod                 18264   0 (unused)
>cdrom                  29408   0 [ide-cd sr_mod]
>ide-scsi                8880   0
>snd-ainstr-simple       2340   0 [snd-trident-synth]
>snd-seq-instr           6192   0 [snd-trident-synth]
>snd-seq-midi            4160   0 (unused)
>snd-seq-midi-event      3592   0 [snd-seq-midi]
>snd-seq                40304   1 [snd-trident-synth snd-seq-midi-emul snd-seq-instr
snd-seq-midi snd-seq-midi-event]
>snd-trident            28252   1 [snd-trident-synth]
>snd-pcm                65024   0 [snd-trident]
>snd-timer              15912   0 [snd-seq snd-pcm]
>snd-util-mem            1408   0 [snd-trident]
>snd-page-alloc          5292   0 [snd-trident-synth snd-trident snd-pcm]
>snd-mpu401-uart         3808   0 [snd-trident]
>snd-rawmidi            15072   0 [snd-seq-midi snd-mpu401-uart]
>snd-seq-device          4448   0 [snd-trident-synth snd-seq-midi snd-seq
snd-trident snd-rawmidi]
>snd-ac97-codec         37888   0 [snd-trident]
>snd                    32644   0 [snd-mixer-oss snd-seq-instr snd-seq-midi
snd-seq-midi-event snd-seq snd-trident snd-pcm snd-timer snd-util-mem
snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec]
>soundcore               4164   3 [snd]
>
>--
><[EMAIL PROTECTED]>
><[EMAIL PROTECTED]>
><[EMAIL PROTECTED]>
>_______________________________________________
>EuG-LUG mailing list
>[EMAIL PROTECTED]
>http://mailman.efn.org/cgi-bin/listinfo/eug-lug
>

--
Bob Crandell
Assured Computing
When you need to be sure.
[EMAIL PROTECTED]
www.assuredcomp.com
Voice - 541-689-9159
FAX - 541-463-1627
Eugene, Oregon


_______________________________________________
EuG-LUG mailing list
[EMAIL PROTECTED]
http://mailman.efn.org/cgi-bin/listinfo/eug-lug

Reply via email to