BTW, I just checked.  I am using the on-board sound of this
Gigabyte.  So all of the HW is working with the possible
exception of the SATA, which I cannot test.
--
Allen Brown
  work: Agilent Technologies      non-work: http://www.peak.org/~abrown/
        [EMAIL PROTECTED]             [EMAIL PROTECTED]
  I am easily satisfied with the very best. --- Sir Winston Churchill


On Mon, 16 May 2005, Allen C Brown wrote:

> [cut]
> > As for Allen's last statement there... I resemble that
> > statement. A few hundred extra Mhz never hurt anybody :-)
> > 
> > That's all,
> > Mr O.
> > 
> > P.S. Motherboard chipsets are a whole other issue that can be
> > expounded upon if requested.
> 
> The reason Shannon recommended the overclocking sites was
> to ensure the mother would run with margin when *not*
> overclocked.  Hence it would be very reliable.  If you
> overclock it you have used up that margin.  Hence your
> reliability will suffer.
> 
> I need reliability more than raw speed.  (One crash costs
> more time than the incremental speed loss from a few MHz
> even over the life of the computer.  And an unreliable mobo
> will crash more than once.)
> 
> I don't even remember if all the HW on the mother was supported.
> I may or may not be using the on-board sound.  The ethernet
> is working, but I can't get it to attach to eth1 rather than
> eth0.  I'm not using the SATA because I don't have a SATA disk.
> USB is working.
> -- 
> Allen Brown
>    work: Agilent Technologies      non-work: http://www.peak.org/~abrown/
>          [EMAIL PROTECTED]                [EMAIL PROTECTED]
>    Negligent (adj.), describes a condition in which you absentmindedly
>    answer the door in your nightie.  --- Washington Post
> 
> > --- Allen Brown <[EMAIL PROTECTED]> wrote:
> >>After getting burned with an unreliable mother (Abit KD7
> >>KT400)
> >>I followed advice from Shannon Dealey and perused the
> >>overclocking
> >>web sites.  From there I selected a Gigabyte GA-7N400 Pro2.  I
> >>also selected RAM from that site. Works great.  Of course I
> >>don't overclock.  I leave that to children.
> >>--
> >>Allen Brown
> 
> _______________________________________________
> EUGLUG mailing list
> [email protected]
> http://www.euglug.org/mailman/listinfo/euglug
> 
_______________________________________________
EUGLUG mailing list
[email protected]
http://www.euglug.org/mailman/listinfo/euglug

Reply via email to