That's partial success. Is there a filesystem on the drive yet? Try "cfdisk /dev/sda" or ""fdisk /dev/sda", then "p"". You should see "sda1, sda2,etc.." if you have more than one partition. Then you can mount the appropriate one.
--- "T. Joseph CARTER" <[EMAIL PROTECTED]> wrote: > > usb-storage: device found at 42 > > usb-storage: waiting for device to settle before scanning > > Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 > > Type: Direct-Access ANSI SCSI > revision: 00 > > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > > sda: assuming drive cache: write through > > SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) > > sda: assuming drive cache: write through > > /dev/scsi/host167/bus0/target0/lun0: p1 > > Attached scsi disk sda at scsi167, channel 0, id 0, lun 0 > > usb-storage: device scan complete > > That's success. Your drive is available as /dev/sda. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
