Hi Steve and All, One thing you could do is put a cap on the pot output might smooth out the starting a bit. Don't know what size though. Try one size and work from there. And make sure if it's non linear it is connected correctly for that. You could buy a better pot as many like in the PB6 were not that good. Another might be starting with a resistor, a piece of SS sheet sized appropriately, that once say a certain voltage, gets shorted out by a contactor. Jerry Dycus
________________________________ From: SLPinfo.org <[email protected]> To: Electric Vehicle Discussion List <[email protected]> Sent: Saturday, April 27, 2013 11:33 AM Subject: Re: [EVDL] Logisystems pot box Steve, I think you are correct that logisystems is out of business. I use a PB-6 with my logisystems unit without difficulty or modification, but I always use my clutch to start off. The few times that I've not used the clutch it is a bit jerky so if you've gone clutchless I can understand the concern. Peter Flipsen Jr On Apr 27, 2013 8:03 AM, "Steve Powers" <[email protected]> wrote: > I am looking for a Logisystems (non linear) 5k pot box. I actually have a > Zapi controller, but it has similar issues to the Logisystems where it is > way too jerky on startup. I used to have a Logisystems pot when I used > their controller in a different car. I've looked, but it appears > Logisystems is gone (out of business?). Does anyone have one of these pots > or can tell me how to achieve the same result modifying my existing Curtis > PB-6? I believe their pot box is geared to achieve the effect. > > Steve > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130427/80fe0a13/attachment.htm > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130427/d7e2d69c/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130427/45d5689f/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
