On 5/24/2013 11:41 PM, Rob Trahms wrote:
FM signal is decent with the ignition in position 1 (where you can remove
the key), but position 2 (just prior to ignition) a general static noise
starts and grows louder until drowning out the FM signal entirely.
The working theory I have is that either the Hairball microcontroller or
possibly the aux voltage gauge is generating the FM noise (seems unlikely
that it would be the TBS e-meter I have, because that is on all the time,
even when the ignition is off).

I think you will find that the noise is coming from something with a microcontroller in an unshielded box (plastic case, bare board, etc.) It could also come from one inside a metal box, if the metal box isn't grounded, or if the wires coming out of that box are not shielded or properly handled so they don't act as antennas.

You should be able to unplug things one at a time until you locate the offending device.

--
The most dangerous enemy of a better solution is an existing one that
is just good enough. -- Eric S. Raymond
--
Lee A. Hart, http://www.sunrise-ev.com/LeesEVs.htm
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to