I am about to finish up the air craft tug Im converting, hardest thing was 
making an adaptor for the motor to the auto trans, I have to start with a steel 
tubing of 18inx1inx6in, mill it to 4.75 in long, space 24 3/8 bolt holes to 
connect to the trans bell housing, 12 on the front side, 12 on the back side, 
mount a plate to the front and mount the 11 inch motor to that. I made a 
coupler to mount the flex plate for the tq,converter . Since the truck has 4 
wheel steering and crab crawl, I had to make a belt drive for the Hyd Pump. 
which also runs the brake system. 
The good thing is Range is NOT an issue, but it will have to move 90,000 lbs 
but at only 5 mph. There may be more to do. 
I should have it done by next week 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/c9b9b3c2/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to