Airport equipment is a good EV market.
We have over 200 of our small tugs in service around the world including 15 at the Hong Kong airport.
http://www.canev.com/might_e_tug.php

We also have over 65 of our 3 ton aircraft refueling trucks in service around the world including Dubai, Australia, England and the US.
http://www.canev.com/npr.php

A few of our small Might-E Trucks are also used on airports.
http://www.canev.com/might_e_truck.php

BFN
Randy


On 30/05/2013 8:42 AM, Thos True wrote:
Great job Wayne!
Would love to see some pics of the project. Have seen a few of the smaller
units that Randy does up at Canadian EV.
-Tom


On Thu, May 30, 2013 at 8:35 AM, Electric Blue auto convertions <
[email protected]> wrote:

I am about to finish up the air craft tug Im converting, hardest thing was
making an adaptor for the motor to the auto trans, I have to start with a
steel tubing of 18inx1inx6in, mill it to 4.75 in long, space 24 3/8 bolt
holes to connect to the trans bell housing, 12 on the front side, 12 on the
back side, mount a plate to the front and mount the 11 inch motor to that.
I made a coupler to mount the flex plate for the tq,converter . Since the
truck has 4 wheel steering and crab crawl, I had to make a belt drive for
the Hyd Pump. which also runs the brake system.
The good thing is Range is NOT an issue, but it will have to move 90,000
lbs but at only 5 mph. There may be more to do.
I should have it done by next week
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/c9b9b3c2/attachment.htm
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA (
http://groups.yahoo.com/group/NEDRA)




_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to