Thanks Cor.

Yes, regen, so I'll get to work on a new mounting plate and find a place
for the joined pair to fit.


On Mon, Jun 24, 2013 at 4:34 PM, Cor van de Water <[email protected]> wrote:

> Mike,
> Only if you gang them mechanically together, so they always open
> together, will you gain from series connection of breakers.
> Do not worry about the higher voltage at charging - the 250A breaker
> will
> only be needed to protect your pack while you are drawing from it, i.e.
> driving, not while charging (unless you have regen). 50 LiFePO4 means
> 3.2V each, so 160V, charged up to 3.45V peak so 172V max? I don't think
> you should worry about the few volts higher, but if you do not like to
> push your luck then gang your two breakers together and that way ensure
> you can break up to 320V.
>
> Success,
>
> Cor van de Water
> Chief Scientist
> Proxim Wireless Corporation http://www.proxim.com
> Email: [email protected] Private: http://www.cvandewater.info
> Skype: cor_van_de_water Tel: +1 408 383 7626
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Mike Scott
> Sent: Monday, June 24, 2013 4:08 PM
> To: Electric Vehicle Discussion List
> Subject: [EVDL] Airpax ALM-250 safe on 160V system?
>
> I'd like to use this breaker I have, but now have 50 LiFePo calls
> instead
> of the 12 12V gels. Is it time to break out the spare breaker and wire
> them
> in series?
>
> The rating says "Max 160V", but charging will go above that.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130624/ae5b
> dcfd/attachment.htm>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA
> (http://groups.yahoo.com/group/NEDRA)
>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130624/de06014a/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to