Hi John, If you look at the Zilla while in DAQ mode you can see if it is seeing the throttle input. The value is in hex, but you can at least see if it is changing while the pot is being moved. Perhaps it just seems like the pot but is actually something else. damon
> Date: Thu, 4 Jul 2013 09:46:00 -0700 > From: [email protected] > To: [email protected] > Subject: [EVDL] Zilla not seeing throttle? > > I'm helping fix up a conversion that's been sitting in the wood for over a > year. > We've almost got it working, but the Zilla doesn't seem to see the throttle > pot movement. > It's sitting with a status of 1314 (wait for throttle pot). > I can see the Potbox moving, but no response from the Zilla. > I disconnected one of the potbox wires and checked it with a meter, and it's > going from 0 to about 5.5K ohms full travel. > The Zilla did detect that one of the wires had been disconnected, and went to > a 1214 status (Potbox wire open) > Connected the wire back up, and the zilla went back to a 1314. > Still no response though. > > Any ideas? > > -- > Bobcats and Cougars, oh my! http://john.casadelgato.com/Pets > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130704/afaeea40/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
