Ok, DAQ Mode 4 gives: 43 00 01 C8 00 55 00 29 23 SOMFS 43 00 01 C8 00 55 00 29 23 SOMFS 60 00 01 C8 06 55 00 29 30 OMFS 72 00 01 C8 12 55 00 29 30 OMFS 77 00 01 C8 1A 55 00 29 30 OMFS 83 00 01 C8 23 55 00 29 30 OMFS 8D 00 01 C8 2A 55 00 29 30 OMFS 97 00 01 C8 37 55 00 29 30 OMFS
DrivePot goes up as I press it. (Good) ArmatureCurrent stays at 0. (Probably Bad) ArmDC goes up. (Expected) MotorVoltage stays at 0. (Bad) To me, this is sounding like a broken controller. sigh. On Fri Jul 05 15:38:35 PDT 2013 [email protected] said: >So, since I couldn't remember which was "best", i tried DAQ mode 1. (didn't >have Zilla docs handy) > >As I work the POT, this is what DAQ Mode 1 showed: > >05 01 C8 00 54 00 29 00 13 23 SOMFS >05 01 C8 00 54 00 29 00 13 00 OMFS >00 01 C8 07 54 00 29 00 13 30 OMFS >00 01 C8 08 54 00 29 00 13 30 OMFS > >"Controller Mode" when from 05 to 00 - but I can't find a definition of this >field. >"Average Duty Cycle" started increasing. (So it's obviously seeing the Pot!) >"Current Error" changed - again, no definition available. >Status changed from "Stopped" to not Stopped. >"Motor Voltage" stayed at 0 the whole time... > >I also noticed that whenever the throttle pedal was pushed, the Zilla stopped >responding to the serial port. > >Guess I'll go try again with DAQ Mode 4. > >On Thu Jul 04 16:30:23 PDT 2013 [email protected] said: >>Hi John, >>If you look at the Zilla while in DAQ mode you can see if it is seeing the >>throttle input. The value is in hex, but you can at least see if it is >>changing while the pot is being moved. Perhaps it just seems like the pot >>but is actually something else. >>damon >> >>> Date: Thu, 4 Jul 2013 09:46:00 -0700 >>> From: [email protected] >>> >>> I'm helping fix up a conversion that's been sitting in the wood for over a >>> year. >>> We've almost got it working, but the Zilla doesn't seem to see the throttle >>> pot movement. >>> It's sitting with a status of 1314 (wait for throttle pot). >>> I can see the Potbox moving, but no response from the Zilla. >>> I disconnected one of the potbox wires and checked it with a meter, and >>> it's going from 0 to about 5.5K ohms full travel. >>> The Zilla did detect that one of the wires had been disconnected, and went >>> to a 1214 status (Potbox wire open) >>> Connected the wire back up, and the zilla went back to a 1314. >>> Still no response though. >>> >>> Any ideas? > >-- > >Bobcats and Cougars, oh my! http://john.casadelgato.com/Pets -- Worlds only All Electric F-250 truck! http://john.casadelgato.com/Electric-Vehicles/1995-Ford-F-250 _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
