Hi EV-modders in NSW Australia.
I have the following for sale, so you can get on the road or the
race-track real soon.
It's a nearly finished project, including:
- Donor and stripped motorcycle frame & body
- DC motor & Controller
- CVT (Continuous Variable Transmission) torque converter, already
assembled and
laser-aligned to the driving sprocket & chain, all the way back to the
rear wheel
- 78V, 20AH worth of LifEPo4 battery cells
Photos of the original progress:
https://plus.google.com/photos/118232573635768868802/albums/5457005788895685809?banner=pwa
which... could not be finished due to time (and money) constrains.
I am also leaving Australia, so I can't take this with me unfortunately.
This project really only needs some touches here and there to get rolling.
i.e. wiring the batteries, rewiring head-lamp and stop lights, and so on.
The bulk of the mechanical-engineering work is done.
The design with the torque converter may seem a bit clumsy, but this
concept is used in snow-mobiles for years (and scooters everywhere but
much smaller sizes), so this, will surprise everyone on the race track...
If you have worked with Curtis controllers, and are comfortable with
wiring the electronics... you will have no problems getting this one going.
Thank you,
Carlos
[email protected]
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140311/6fc771fd/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)
